Белорусский национальный технический университет
Repository of the Belarusian National Technical University
ISSN: 2310-7405
Repository of the Belarusian National Technical University
View Item 
  •   Repository BNTU
  • Сериальные издания
  • Энергетика. Известия высших учебных заведений и энергетических объединений СНГ
  • 2017
  • №1
  • View Item
  •   Repository BNTU
  • Сериальные издания
  • Энергетика. Известия высших учебных заведений и энергетических объединений СНГ
  • 2017
  • №1
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Расчет режимных параметров линии наружного освещения с двусторонним питанием. Часть 2

Thumbnail
DOI
10.21122/1029-7448-2017-60-1-30-40
Authors
Козловская, В. Б.
Калечиц, В. Н.
Date
2017
Publisher
БНТУ
Another Title
Calculation of Operation Mode of Outdoor Lighting Line with Bilateral Supply. Part 2
Bibliographic entry
Козловская, В. Б., Калечиц В. Н. Расчет режимных параметров линии наружного освещения с двусторонним питанием. Часть 2 = Calculation of Operation Mode of Outdoor Lighting Line with Bilateral Supply. Part 2 / В. Б. Козловская, В. Н. Калечиц // Энергетика. Известия высших учебных заведений и энергетических объединений СНГ. – 2017. – № 1. – С. 30-40.
Abstract
Важнейшими особенностями линий наружного освещения являются их значительная протяженность и использование большого количества источников света средней мощности. В таких условиях для определения и поддержания оптимальных режимов работы сети наружного освещения с двусторонним питанием необходимо правильно выбрать сечение проводников линии. Такое сечение должно обеспечивать требуемые уровни напряжения на источниках света во всех режимах, но при этом не должно быть завышено, чтобы не увеличивать стоимость электрической сети. В статье приведен пример, где показан выбор оптимального сечения проводников осветительной линии при ее работе в нормальном режиме (двустороннее питание) с уровнями напряжения в пунктах питания 230 В, а также в режиме с односторонним питанием (при потере напряжения во втором пункте питания) со значением напряжения в первом пункте питания 230 В. Использована представленная в части 1 статьи методика расчета режима такой линии. Расчет осуществлен с помощью реализованных в среде MathCad программ. Представлены графики распределения напряжений в точках осветительной линии с двусторонним питанием в разных режимах работы, построенные для различных сечений алюминиевых жил. На их основе осуществлен выбор оптимального значения сечения проводников осветительной сети. Проанализированы особенности разных режимов работы осветительной линии с выбранным сечением проводников. Определены режимные параметры для каждой фазы линии: напряжения в точках схемы, мощности, токи, потери мощности и падение напряжения на всех участках. Представленные данные позволяют оценить электропотребление осветительной линии с учетом суточного графика включения и отключения сети наружного освещения. Определены наиболее экономичные режимы.
Abstract in another language
The most important features of outdoor lighting lines are of considerable length and the use of a large number of light sources of an average power. Under such conditions, in order to determine and maintain the optimal modes of operation of outdoor lighting networks with a bilateral supply it is necessary to choose the wire section of the line. This section should provide the required voltage levels to the light sources in all modes, but it should not be too high, in order not to increase the cost of the grid. This article demonstrates an example of the choice of the optimum conductor cross-section of the lighting line when it is working in a normal mode (bilateral power supply) with voltage levels at the power items of 230 V, as well as in the mode of unilateral power (at voltage loss in the second power item) with a value of the voltage of 230 V in the first item of the power supply. The method of calculation of the mode of such a line that had been presented in part 1 of the article was used. The calculation is performed with the of MathCad software. The diagrams of the voltage distribution at items of the lighting line with bilateral power under conditions of different modes of functioning are plotted for various sections of aluminum conductors. The choice of the optimal values of the cross sections of the lighting network was based on the mentioned diagrams. The specific features of different modes of operation of the lighting line with the chosen conductor cross section were analyzed. Operating parameters for each phase of the line (i.e. voltage at the items of the circuit, power, currents, power loss and voltage drop in all sections) were determined. The presented data make one possible to estimate the power consumption of the lighting line taking the daily schedule of enabling and disabling of outdoor lighting networks into account. The most economical modes were determined.
URI
https://rep.bntu.by/handle/data/27366
View/Open
30-40.pdf (1.375Mb)
Collections
  • №1[7]
Show full item record
CORE Recommender

Belarusian National Technical University | Science Library | About Repository | Размещение в Репозитории | Contact Us
Яндекс.МетрикаIP Geolocation by DB-IP
Science Library | About Repository | Размещение в Репозитории | Contact Us
 

Browse

All of Repository BNTUCommunities & CollectionsAuthorsTitlesBy Issue DatePublisherBy Submit DateTypeThis CollectionAuthorsTitlesBy Issue DatePublisherBy Submit DateType

My Account

LoginRegister

Belarusian National Technical University | Science Library | About Repository | Размещение в Репозитории | Contact Us
Яндекс.МетрикаIP Geolocation by DB-IP
Science Library | About Repository | Размещение в Репозитории | Contact Us