Материалы конференции по статьям: Recent submissions
Now showing items 61-80 of 88
-
Концепт слова «Сям’я» / «家» в белорусской и китайской культуре
(БНТУ, 2025)This article examines the concept of the word “Сям’я” / “家” within the Belarusian and Chinese cultures as one of the important layers of social and cultural life in both countries.2026-01-26 -
Параллели и контрасты в структурной организации белорусского, русского и китайского языков как основа межкультурного диалога
(БНТУ, 2025)This article posits that a deep understanding of the structural organization of languages – specifically their word formation and grammar – can serve as a powerful foundation for bridging cultural divides and fostering mutual understanding between nations.2026-01-26 -
Computerized sample rotation control system with remote access VIA the internet
(БНТУ, 2025)The study examines the design principles of a laboratory system with remote-access capabilities that enable students to interact with the experimental setup in real time, including remote control of sample rotation. A structural scheme for remote sample control based on the NodeMCU microcontroller platform has been developed and substantiated.2026-01-26 -
Разработка многокомпонентного лечебно-профилактического и поддерживающего комплекса БАД «Гидробионт-ремиссин» для совместного использования во время и после проведения химиолучевой терапии больных раком головного мозга или поджелудочной железы
(БНТУ, 2025)The need to develop a new, more comprehensive dietary supplement to accompany and support the treatment of cancer patients undergoing chemoradiation therapy is discussed, replacing the diverse but often ineffective single supplements with one or two components. This is particularly relevant to the treatment of severe forms of the disease, such as brain and pancreatic cancer.2026-01-26 -
Разработка перспективного сверхтвердого нанокомпозитного керметного сплава для промышленного и военного применения
(БНТУ, 2025)The need for the creation of a new promising superhard cermet alloy, superior in microhardness to any type of armor and industrial ceramics and combining the properties of titanium alloys (resistance to severe operating conditions) and superhard materials (resistance to splitting), is considered.2026-01-26 -
Комбинированная технология создания износостойких композиционных покрытий
(БНТУ, 2025)A combined technology for wear-resistant composite coatings on steel parts is proposed, combining cold gas-dynamic spraying of an aluminum interlayer with boron nitride addition and subsequent micro-arc oxidation to form a ceramic layer with enhanced operational properties.2026-01-26 -
Development of compositions for colored container glass
(БНТУ, 2025)The research gives information on the optimize coloured glass composition according to the content of the main components.2026-01-26 -
Development of an X-ray laboratory digital twin
(БНТУ, 2025)To support the training of students in operating an X-ray laboratory, a digital twin of the laboratory facility will be developed. The digital twin will reproduce the functional capabilities of the X-ray equipment and simulate the complete workflow of an X-ray experiment. Access to the digital twin will be provided via the Internet as well as from workstation computers located ...2026-01-26 -
Research of use of construction silica sand of the Republic of Belarus in container glass production
(БНТУ, 2025)The research examines the possibilities of using class 2 construction works natural sand in semi-white and colourless container glass production. The influence of the granulometric and chemical composition of silica sand on the glass formation processes during container glass production was examined.2026-01-26 -
Optimization of hybrid laser and RF inter satellite links in multi-layer low earth orbit (LEO) satellite constellations
(БНТУ, 2025)The rapid expansion of Low Earth Orbit (LEO) satellite constellations has introduced new challenges in inter-satellite communication. Hybrid architectures combining laser and radio frequency (RF) links are increasingly recognized as a promising solution to balance high throughput, reliability, and resilience. This paper investigates optimization strategies for hybrid laser/RF ...2026-01-26 -
Структурообразование высокоплотной керамики на основе импактных алмазов и карбида бора, полученной методом горячего динамического прессования
(БНТУ, 2025)The structure formation of high-density ceramics based on impact diamonds and boron carbide obtained by hot dynamic pressing was investigated.2026-01-26 -
Технология обработки и методы контроля крупногабаритного асферического зеркала
(БНТУ, 2025)Large round optical mirrors include products with a diameter of 200 to 6000 mm. The aspherical shape minimizes optical distortion (aberration), which improves image quality. This shape allows you to use fewer lenses to achieve the desired effect, making the optical system more compact and lightweight, and also provides a wider field of view with high clarity. The aspherical shape ...2026-01-26 -
Роль лазерной обработки в улучшении состояния поверхности плазменных керамических покрытий
(БНТУ, 2025)This study examines the effect of laser treatment on the surface state of plasma-sprayed Al2O3 ceramic coatings. Surface remelting is shown to significantly reduce roughness and porosity, producing a smooth and dense surface without mechanical damage.2026-01-26 -
Характеризация структурных свойств дендритов меди, полученных в гальваностатическом режиме электролиза
(БНТУ, 2025)Dendritic copper film samples obtained by electrolytic deposition on a copper substrate at a current density of 20 A*dm-2 were analyzed using image recognition. The structure of the dendritic films was studied using optical microscopy. ImageJ software was used to characterize the interdendritic space. The analysis resulted in porosity measurements and the maximum, average, and ...2026-01-26 -
Методика проверки лучевой прочности оптических покрытий в ультрафиолетовой области спектра
(БНТУ, 2025)An optimal method for checking the compliance of the radiation strength of optical coatings with those specified for operation in the UV region of the spectrum is proposed.2026-01-26 -
Кинетика формирования диффузионного слоя при электролитно-плазменном азотировании титана
(БНТУ, 2025)Electrolytic plasma nitriding (EPN) significantly accelerates the saturation of the titanium surface with nitrogen atoms, making the selection of process duration critically important. It has been established that the maximum degree of saturation of VT1 titanium plates during EPN is achieved after 10 minutes of treatment. However, to minimize changes in sample geometry, it is ...2026-01-26 -
Исследование адгезии к эмали зуба стеклоиономерных цементов, замешанных с использованием ультразвука
(БНТУ, 2025)The change in adhesion of glass ionomer cement (GIC) to prepared tooth enamel when the GIC was exposed to ultrasound (characteristics are 23 kHz, power level 1 and 50 % filling) during mixing has been studied. The increase in the adhesion compared to cement without ultrasound exposure was 8 %.2026-01-26 -
Вольт-амперные характеристики наноразмерных пленок оксида титана, полученных анодным окислением
(БНТУ, 2025)This work studies the electrical properties of nanoscale TiO₂ films obtained by anodic oxidation. Current-voltage characteristics measured in the temperature range 263–300 K show a dominant charge injection mechanism at the metal-oxide interface. The analysis confirms that the conductivity is determined by defect states rather than the intrinsic properties of the dielectric.2026-01-26 -
Модернизация конусной дробилки для крупного дробления горных пород
(БНТУ, 2025)The analysis of the factors affecting the efficiency of operation, as well as the scheduled preventive maintenance of cone crushers of large crushing is carried out. A method for monitoring the condition of armor plate using a 3D scanner is proposed. An innovative solution has been developed to replace individual armor plates with two solid armor rings along the lower cords of a ...2026-01-26 -
Анализ сил шлифования плазменных керамических покрытий на основе оксида алюминия с использованием механистической модели
(БНТУ, 2025)The paper evaluates the applicability of a mechanistic grinding force model for plasma-sprayed Al₂O₃-based ceramic coatings modified with boron and titanium oxides. Experimental validation shows high correlation (R² > 0.89), confirming the model's effectiveness in predicting forces and guiding process optimization.2026-01-26



















