Browsing 2019 by Issue Date
Now showing items 41-60 of 129
-
Анализ технологического процесса линии по розливу и упаковке кетчупа (майонеза) на ОАО «Минский маргариновый завод»
(БНТУ, 2019)In this work, the technological process of the line for bottling and packaging of ketchup (mayonnaise) POLPAK D2000K is considered. The main components of the line POLPAK D2000K are listed. The shortcomings in the operation of the line and ways to eliminate them are given.2020-06-08 -
Передовые технологии в создании силовых модулей для управления электроприводами
(БНТУ, 2019)В данной работе рассмотрены вопросы повышения эффективности управления электроприводами с помощью IGBT-модулей пятого поколения Trench-FieldStop. Показаны особенности сочетания передовых технологий создания IGBT-модулей и их применения в современных преобразователях энергии.2020-06-08 -
Пути модернизации технологических процессов производства
(БНТУ, 2019)In this article we will consider issues related to the production of quality products at a high pace of their production, increase in the quality of manufactured products and reduction of manual labor share, as well as reduction of the product cost.2020-06-08 -
Численное моделирование электроконтактного спекания порошковых композиций на основе WC
(БНТУ, 2019)Горанский, Г. Г. Численное моделирование электроконтактного спекания порошковых композиций на основе WC / Г. Г. Горанский, Д. П. Кункевич, А. И. Поболь // Новые горизонты - 2019 : сборник материалов Белорусско-Китайского молодежного инновационного форума, Минск, 12–13 ноября 2019 г. / Белорусский национальный технический университет. – Минск : БНТУ, 2019. – С. 22-24.2020-06-08 -
Анализ работы современных электробусов
(БНТУ, 2019)В связи с техническим прогрессом ведущие заводы мира. Постоянно пытаются модернизировать разные виды электробусов. На данный момент электробус один из самых экологически безопасных и тихих наземных транспортов. Модернизация касается всех узлов электробуса таких как, элементы питания, внешний вид, тяговый электродвигатель и т.д. Электробусами белоруского производства интересуются ...2020-06-08 -
Разработка мобильного приложения «Библиотека МГПК»
(БНТУ, 2019)Разработка электронной библиотеки МГПК для смартфонов под Аndroid и других операционных систем.2020-06-08 -
Статистическая оценка действительного динамического воздействия на пролётные строения мостов
(БНТУ, 2019)The paper describes some problems of revealing the actual value of the dynamic load on the spans of small and medium bridges. Problems of correct statistical estimation have been described.2020-06-08 -
Современные системы числового программного управления металлообрабатывающего оборудования
(БНТУ, 2019)In this article we consider modern systems of numerical control of metalworking equipment. Nowadays, the use of man as a key element of the machine control system more often represents increased productivity. The program of this element is set on the program carriers. The main CNC programming language for equipment is described by ISO 6983 document of the International Standards ...2020-06-08 -
Композиционные материалы, их применение и эффективность
(БНТУ, 2019)This article describes how rapidly increasing interest and demand of consumers in the use of composite materials in various spheres of human activity. It describes where and in what areas composite materials are used their disadvantages, advantages and effectiveness.2020-06-08 -
Пути модернизации технологических процессов производства
(БНТУ, 2019)In this article we will consider issues related to the production of quality products at a high pace of their production, increase in the quality of manufactured products and reduction of manual labor share, as well as reduction of the product cost.2020-06-08 -
Модернизация плоскошлифовального станка модели 3Л722А путем установки преобразователя частоты
(БНТУ, 2019)The issuesof modernization of the machine are very relevant. In this work, the desing of the frequency converter, hu principle of its operation and the main advantades will be considered, proposals for the modernization and installation of frequency converters on machines of the old type are made.2020-06-08 -
Исследования влияния состава и свойств электролита при электрохимическом полировании на качество поверхности, сталей машиностроительного назначения
(БНТУ, 2019)The article investigated the influence of the composition and properties of the electrolyte, during electrochemical polishing, on the surface quality, processing performance of steel for engineering purposes. This allows for high processing efficiency. The aim of the work is to establish the composition of electrolytes; with which you can achieve high processing Efficiency.2020-06-08 -
Разработка системы диагностирования редуктора мотор-колеса карьерного самосвала
(БНТУ, 2019)The reliability analysis of heavy mining dump trucks with electromechanical transmission is completed. The diagram of the diagnostic system of the gear motor-wheel according to the state of the working fluid in it, as well as maintaining the nominal properties of the liquid during the machine operation is developed.2020-06-08 -
Информационная образовательная среда как фактор повышения эффективности подготовки инженера-педагога
(БНТУ, 2019)In connection with the increase in the number of cars, as well as the deterioration of the environmental situation in big cities, the need arose to find ways to reduce emissions of harmful substances from automobile engines. In recent years, diesel engines have become increasingly common in vehicles. The vast majority of trucks, buses and agricultural machinery are equipped with ...2020-06-08 -
Инновационные виды сварки. Сварка взрывом
(БНТУ, 2019)Богородова, М. Л. Инновационные виды сварки. Сварка взрывом / М. Л. Богородова, В. В. Никанович // Новые горизонты - 2019 : сборник материалов Белорусско-Китайского молодежного инновационного форума, Минск, 12–13 ноября 2019 г. / Белорусский национальный технический университет. – Минск : БНТУ, 2019. – С. 16-17.2020-06-08 -
Применение микросекундных импульсов для электрохимического полирования легкоокисляемых металлов и сплавов
(БНТУ, 2019)The technology of electrochemical processing using microsecond pulses was developed, which provides the possibility of high-quality polishing and purification of easily oxidized metals and alloys, including difficult to process, in electrolytes of simple compositions without the use of toxic components. The results of studies of the influence of the frequency and duration of ...2020-06-08 -
Стойкость металлорежущего инструмента и ее влияние на процесс и время металлообработки
(БНТУ, 2019)In modern industry, flexible production systems and CNC machines are actively introduced into production. In the processing on CNC machines used prefabricated tools (lathe cutters and mills) with mechanical fastening of the cutting inserts. In the case of precast incisors, one of the main parameters is the tool durability. This parameter is very important for the tool, as a high ...2020-06-08 -
Биологические протезы клапанов сердца: история развития и современное применение
(БНТУ, 2019)This article describes the history of the development and application of biological heart valve prostheses, their advantages and disadvantages. The design of the aortic valve prosthesis developed by the Science and Technology Park of BNTU "Polytechnic" is described, the results of experimental studies are presented.2020-06-08 -
Анализ параметров буровзрывных работ при использовании промышленных эмульсионных взрывчатых веществ в условиях карьера «Микашевичи»
(БНТУ, 2019)The paper analysis the parameters of borehole charges when using emulsion explosires and a non-electric blasting system «Iskra» at a granite quarry.2020-06-08 -
Использование систем автоматизированного проектирования в учебной деятельности
(БНТУ, 2019)The article gives a comparative analysis of computer-aided design systems in learning activities in the preparation of electrical technicians.2020-06-08