Now showing items 1-20 of 78

    • A novel process for leaching vanadium from the vanadium slag 

      Guoquan, Zhang; Ting-an, Zhang (БНТУ, 2014)
      In China, the comprehensive utilization of vanadium and titanium resource is an important scientific and technological issue. Meanwhile, energy conservation and environmental protection is much more serious than ever before. In the traditional process for vanadium extraction, the roasting process is the key step for oxidize V (III) and V(IV) to V (V) of the vanadium slag by ...
      2018-05-11
    • Data mining для офсетной типографии. Планирование 

      Степаненко, И. С.; Семенчук, Н. В. (БНТУ, 2014)
      In the report the concept of intellectual collecting and the analysis of data for offset printing house is considered. The example of automation of process of planning of loading of the equipment of production shop is given.
      2018-05-15
    • Edible food packing films: casting solution and films properties 

      Po, Huo; Savitskaya, Tatsiana; Hrynshpan, Dzmitry; Gotina, Lizaveta; Xuchang, Hu; Weixin, Zeng (БНТУ, 2014)
      Edible food packing films: casting solution and films properties / Huo Po [et al.] // Научные и инновационные проекты и инициативы молодежи Беларуси и Китая : сборник материалов конференции в рамках Белорусско-Китайского молодежного инновационного форума "Новые горизонты - 2014", 3-4 декабря 2014 г. – Минск : БНТУ, 2015. – С. 9-10.
      2018-05-10
    • Gene engineering construction of Enterococcus faecalis strain as lactic acid promoter 

      Чжао, Юй (БНТУ, 2014)
      Чжао, Юй. Gene engineering construction of Enterococcus faecalis strain as lactic acid promoter / Чжао Юй // Научные и инновационные проекты и инициативы молодежи Беларуси и Китая : сборник материалов конференции в рамках Белорусско-Китайского молодежного инновационного форума "Новые горизонты - 2014", 3-4 декабря 2014 г. – Минск : БНТУ, 2015. – С. 105-106.
      2018-05-11
    • Highly efficient ER,YB:YAL3(BO3)4 laser emitting in the 1.5-1.6 μM spectral range 

      Gorbachenya, K. N.; Kisel, V. E.; Yasukevich, A. S.; Maltsev, V. V.; Leonyuk, N. I.; Kuleshov, N. V. (БНТУ, 2014)
      The highly efficient Er,Yb:YAl3(BO3)4 laser emitting in the 1.5-1.6 μm spectral range was demonstrated. A maximal output power of 1.6 W in CW and 2.7 W in QCW regimes with slope efficiency up to 40 % was obtained at 1522 nm.
      2018-05-11
    • Modeling of polydispersed bubbly flow in continuous casting mold using multiple-size-group model 

      Zhongqiu, Liua; Baokuan, Lib; Maofa, Jiangc (БНТУ, 2014)
      A population balance model based on the Multiple-Size-Group (MUSIG) approach has been developed to investigate the polydispersed bubbly flow inside a slab continuous casting mold. The Eulerian-Eulerian approach is used to describe the motion of the two-phase flow. Sato and Sekiguchi model is used to account for the bubble induced turbulence. Luo and Svendsen model and Prince and ...
      2018-05-10
    • Plasmid, replicon, enterococcus faecalis, copy number, inheritance, vector systems 

      Chao, Yu (БНТУ, 2014)
      Chao, Yu. Plasmid, replicon, enterococcus faecalis, copy number, inheritance, vector systems / Chao Yu // Научные и инновационные проекты и инициативы молодежи Беларуси и Китая : сборник материалов конференции в рамках Белорусско-Китайского молодежного инновационного форума "Новые горизонты - 2014", 3-4 декабря 2014 г. – Минск : БНТУ, 2015. – С. 107.
      2018-05-11
    • Research on innovation and entrepreneurship of chinese postgraduate 

      Qi, Ji (БНТУ, 2014)
      This paper briefly describes the significance current situation and problems of Chinese postgraduate innovation and entrepreneurship, analyzes the factors restricting Chinese postgraduate innovation and entrepreneurship, and puts forward some ideas and countermeasures to solve the problems.
      2018-05-14
    • Spectroscopic and luminescence properties of erbium ions in transparent glass-ceramics containing (ER,YB)NBO4 nanocrystals 

      Skoptsov, N. A.; Dymshits, O. S.; Zhilin, A. A.; Alekseeva, I. P.; Yumashev, K. V. (БНТУ, 2014)
      Transparent glass-ceramics containing nanocrystals of (Er,Yb)NbO4 and β-quartz solid solution have been prepared; their absorption spectra, IR and up-conversion luminescence spectra have been studied. Spectral-luminescent characteristics prove these materials to be promising media for 1.5 μm laser generation.
      2018-05-10
    • Study on dendritic growth of FE-0.82WT%C alloy 

      Weiling, Wang; Sen, Luo; Miaoyong, Zhu (БНТУ, 2014)
      A series of mathematical models and codes are developed to investigate the dendritic growth of Fe-0.82wt%C alloy. It is found that the small columnar dendrites are growing under the restriction of neighboring bigger ones and will be eventually combined to form the stronger columnar dendrites. With the decrease of cooling intensity, the primary dendrite arm spacing increases, and ...
      2018-05-10
    • The laser welding features of stainless steels and galvanized steels 

      Lapkouski, A.; Devoino, O. (БНТУ, 2014)
      This paper is about the most important investigation result process of laser welding thin stainless and galvanized plates. The feature of this issue was the need to preserve the appearance of side reversed side of welding.
      2018-05-10
    • Youth entrepreneurship support mechanisms: belarusian national technical university case study 

      Gmyrak, V. N.; Tamashevich, N. Yu. (БНТУ, 2014)
      Gmyrak, V. N. Youth entrepreneurship support mechanisms: belarusian national technical university case study / V. N. Gmyrak, N. Yu. Tamashevich // Научные и инновационные проекты и инициативы молодежи Беларуси и Китая : сборник материалов конференции в рамках Белорусско-Китайского молодежного инновационного форума "Новые горизонты - 2014", 3-4 декабря 2014 г. – Минск : БНТУ, 2015. ...
      2018-05-14
    • Актуальные проблемы инновационного развития предприятий 

      Алёшина, Е. С.; Скрипник, Я. В. (БНТУ, 2014)
      Recently, innovative development is relevant, because in the modern world, innovation is an integral part of the country. In this paper, based on scientific studies of innovative enterprise development challenges identified innovation Belarus at various levels. Also offered some direction to solve this problem.
      2018-05-14
    • Анализ привлечения инвестиций Республики Беларусь 

      Пристром, М. В.; Скалабан, Ю. О. (БНТУ, 2014)
      Процесс инвестирования играет важную роль в экономике любой страны. Инвестирование в значительной степени определяет экономический рост государства, занятость населения и составляет существенный элемент базы, на которой основывается экономическое развитие общества. В данной работе описана инвестиционная обстановка Республики Беларусь. Представлен инвестиционный климат государства, ...
      2018-05-14
    • Архитектурно-планировочная организация Китайско-Белорусского индустриального парка 

      Лу, Гопин (БНТУ, 2014)
      China's experience in the creation of industrial parks is implemented in the design of the Chinese-Belarusian industrial park. The article describes the placement of the park in the region of Minsk and presents data on the total area, population and jobs. One of the key aspects of park planning and development is features of its functional zoning.
      2018-05-15
    • Беларусь – Китай: электронные проекты 

      Ли, Чжунхуа (БНТУ, 2014)
      Использование информационных технологий в экономике способствует повышению эффективности работы предприятий. Интернет стал необходимым инструментом для успешной торговли на локальных и международных рынках.
      2018-05-15
    • Биогазовые технологии для оптимизации топливного баланса Республики Беларусь 

      Зубик, П. В. (БНТУ, 2014)
      Зубик, П. В. Биогазовые технологии для оптимизации топливного баланса Республики Беларусь / П. В. Зубик // Научные и инновационные проекты и инициативы молодежи Беларуси и Китая : сборник материалов конференции в рамках Белорусско-Китайского молодежного инновационного форума "Новые горизонты - 2014", 3-4 декабря 2014 г. – Минск : БНТУ, 2015. – С. 89-90.
      2018-05-11
    • Влияние способов обработки поверхности металлических имплантатов на ее адсорбционные свойства 

      Киселев, М. Г.; Дроздов, А. В.; Монич, С. Г.; Макаренко, М. В. (БНТУ, 2014)
      Article is devoted to determining the effect of different surface treatments of metallic implants and its cytotoxicity and adsorption properties. It is shown that in addition to the traditionally used methods of processing (modification) of the surface of metallic implants (abrasive blast and shot peening) promising is the use of electric discharge machinery (EDM), which allows ...
      2018-05-10
    • Высокоглиноземистая проницаемая керамика для микро- и ультрафильтрации дисперсных систем 

      Гундилович, Н. Н. (БНТУ, 2014)
      As alternative to a traditional foamglass the made foam silicate material (Si-aero) which technology of receiving is developed in the Belarusian State Technological University can serve. Technological process of production of the granulated material with a bulk density of 100–200 kg/m3 (depending on the size of granules) includes stages: drying, mechanoactivation of initial raw ...
      2018-05-10
    • Высокотемпературные термоэлектрики на основе сложных оксидов металлов 

      Мацукевич, И. В.; Красуцкая, Н. С.; Чижова, Е. А.; Клындюк, А. И. (БНТУ, 2014)
      It is shown that oxide ceramics based on the layered calcium or sodium cobaltites (p-type conductors) and barium–strontium plumbates (n-type conductors) possess good thermoelectric characteristics and may be used in high-temperature thermoelectric converters. So, for the Ca2,8Er0,2Co4O9+, Na0,89Co0,9Ni0,1O2 and Ba0,2Sr0,8Pb1,1O3,2 samples power factor and figure-of-merit values ...
      2018-05-10