Browsing Новые горизонты by Author "Басалай, Г. А."
Now showing items 1-20 of 25
-
Selection of heat storage molten salt used in solar tower thermal plants
Runda, Li (БНТУ, 2020)The advantage of molten salt being as the heat storage material of solar thermal plant is clear. With the advantages of solar thermal plant system especially the tower system being more and more apparent, the improvement of molten salts’ working temperature has drawn more and more importance too. Molten salts already existing and being used are mainly nitrates, however their ...2021-01-26 -
Алгоритмы определения параметров упругих лепестковых муфт
Коршун, К. С.; Жовнерик, А. Н.; Басалай, Г. А. (БНТУ, 2023)An analysis of the operational properties of elastic bush-pin couplings is presented. Methods for studying the stress-strain state of elements of elastic leaf couplings are presented. Algorithms have been developed to perform verification and design calculations of elastic leaf couplings.2024-01-23 -
Анализ энергозатрат на фрезерование массива горной породы зубками соосных роторов проходческого комбайна
Жоров, А. А.; Прушак, К. С.; Басалай, Г. А. (БНТУ, 2019)The analysis of power consumption on the rock massif milling operation by the cogs of coaxial rotors of a road header is described. The scheme of the rotors’ modernization for the dynamic loading reduction of the executive actuator is given.2020-06-08 -
Курсовая устойчивость щеленарезной машины при нарезании боковой щели в почве выработки
Савчук, Д. А.; Довидович, А. А.; Басалай, Г. А. (БНТУ, 2022)The analysis of the course stability of a caterpillar slot-cutting machine with an executive body “chain bar” when cutting a side slot in the working soil was carried out.2023-01-24 -
Мероприятия по повышению эксплуатационных параметров карьерных самосвалов
Ольшевский, А. В.; Ярутич, Я. О. (БНТУ, 2020)The analysis of the main operational properties of heavy-duty mining dump trucks and the ways of their improvement is carried out. Basic options for increasing some performance indicators of heavy-duty mining dump trucks by introducing special technical means and technological methods of their work at mining enterprises are presented.2021-01-26 -
Мероприятия по снижению негативного воздействия на окружающую среду эксплуатации карьерных самосвалов
Ярутич, Я. О.; Новикова, С. В.; Цагельник, А. В. (БНТУ, 2021)The analysis of the efficiency the development of measures to improve the efficiency of mining dump trucks. The analysis of mining, geological and technological conditions of the operation of dump trucks on a quarry for the extraction of building stone and their impact on the environment. The following tasks are solved: reducing the formation of solid waste from tire wear and ...2022-03-05 -
Методика задания направления криволинейному участку горной выработки для эффективной работы проходческого комбайна
Вишневская, А. А.; Басалай, Г. А. (БНТУ, 2022)A technique for the formation of a project for setting the direction of a curved section of a mine working for the effective operation of a tunneling machine in preparing a long-wall face for a treatment complex is given. The calculation of allowable load modes on the executive bodies was carried out and the recommended operating speeds of the combine were determined when driving ...2023-01-24 -
Методики расчета технологического оборудования подготовительных отделений линий по переработке и обогащению полезных ископаемых
Цагельник, А. В.; Виюк, О. С. (БНТУ, 2020)The general principles of calculating the main parameters of bins, feeders and batchers are considered. The developed algorithms make it possible to optimize them depending on the physical and mechanical properties of rocks, as well as the modes of operations in technological lines of processing and enrichment of minerals.2021-01-26 -
Мониторинг техногенных землетрясений в солигорском горно-промышленном регионе
Каток, Н. С.; Басалай, Г. А. (БНТУ, 2023)The results of monitoring of man-made earthquakes in the Soligorsk mining and industrial region are presented. The mentioned earthquakes occur as a result of large-scale development of potassium salt deposits using the underground method.2024-01-23 -
Обоснование параметров шагающего движителя экскаватора
Горностай, М. С.; Евтягин, Д. О. (БНТУ, 2014)The algorithm and the program of calculation of trajectories of the main hinges of the mechanism of walking of the excavator are developed. For increase of stability of the walking excavator on a frame of a rotary platform the additional support in the form of a cross ski is fixed.2018-05-10 -
Обоснование технологии и оборудования для производства композитного кускового топливного торфа
Джежора, И. В. (БНТУ, 2014)In work two essentially new technological schemes and a complex of the equipment for production of Composite Fuel Sod Peat are proved. The main installation consists of coaxially located two delivery mechanisms of continuous action.2018-05-10 -
Опыт применения механизированного проходческого комплекса на строительстве шахтных стволов
Веремейчик, Н. С.; Басалай, Г. А. (БНТУ, 2022)The main stages of the process of building a mine shaft are considered. The principle of operation and experience of using a mechanized tunneling complex in the construction of mine shafts in Belarus are described.2023-01-24 -
Особенности расчета основных параметров механизмов шагания одноковшовых экскаваторов и отвалообразователей
Щигельскя, А. Д.; Боровик, И. С. (БНТУ, 2020)The analysis of the factors influencing the stability of walking excavators and overburden spreaders is carried out. The method of calculating the main parameters of the walking mechanisms of mining machines is presented. The simulation of the movement of a spreader equipped with a cam walking mechanism has been performed. The analysis of parameters during the movement of an ...2021-01-26 -
Повышение надежности технологического оборудования для дробления горной породы при производстве калийных удобрений
Писарев, Д. Ю.; Яковлев, Е. С.; Басалай, Г. А. (БНТУ, 2019)The paper analyses the performance of the rock fragmentation equipment in potassium fertilizer manufacture. It recommends an algorithm to specify basic structural performance parameters of the pulverator.2020-06-08 -
Повышение надежности технологического оборудования для дробления гранита при производстве щебня
Зубко, Д. О.; Юрчик, Е. С.; Басалай, Г. А. (БНТУ, 2019)The analysis of the technological equipment operation for the granite crushing in the break stone production is described. The scheme of the executive actuator modernization of the cone-type crusher is given.2020-06-08 -
Повышение ресурса шин карьерных самосвалов
Терещенко, А. Ю.; Любимов, А. А.; Басалай, Г. А. (БНТУ, 2019)The analysis of the load modes of tyres during the operation of mining dump trucks is carried out. The technological measures and design schemes of installations providing an increase in the resource of the dump truck tyres are proposed.2020-06-08 -
Повышение эффективности очистного комплекса при подземной разработке месторождения калийных солей
Басалай, Г. А. (БНТУ, 2018)Басалай, Г. А. Повышение эффективности очистного комплекса при подземной разработке месторождения калийных солей / Г. А. Басалай // Новые горизонты - 2018 : сборник материалов Белорусско-Китайского молодежного инновационного форума, 15-16 ноября 2018 г. : в 2 т. – Минск : БНТУ, 2018. – Т. 1. – С. 49-52.2019-05-03 -
Повышение эффективности работы ленточного конвейера
Сулакадзе, В. В.; Шульдов, Н. А.; Казаченко, Г. В.; Басалай, Г. А. (БНТУ, 2019)The paper analyses the performance of rock fragmentation equipment in potassium fertilizer manufacture. It submits a technology for evaluation of power distribution when it is transmitted by friction from the driving drum to the conveyer belt.2020-06-08 -
Повышение эффективности работы проходческого комплекса в сложных горно-геологических условиях
Евстратиков, Д. В.; Семененко, А. А.; Басалай, И. А.; Басалай, Г. А. (БНТУ, 2019)The article presents the results of the analysis of the tunneling complex operation in difficult mining conditions. The methods and equipment for preparing drilling fluid and improving the efficiency of rock cutting by the rotor of the tunnel shield are given.2020-06-08 -
Повышение эффективности работы технологического оборудования при проведении буровзрывных работ на карьере строительного камня
Казанович, К. А.; Воропаева, Д. К. (БНТУ, 2020)The main types of equipment for carrying out drilling and blasting operations in a building stone quarry are considered: shot holes drills in rocks, as well as machines for mechanized loading of explosives in the production of massive explosions in quarries. The features of the application of technological schemes for switching charges in the production of mass explosions at ...2021-01-26