Show simple item record

dc.contributor.authorКомар, Д. И.ru
dc.contributor.authorЛукашевич, Р. В.ru
dc.contributor.authorГузов, В. Д.ru
dc.contributor.authorКутень, С. А.ru
dc.coverage.spatialМинскru
dc.date.accessioned2017-09-04T11:26:45Z
dc.date.available2017-09-04T11:26:45Z
dc.date.issued2017
dc.identifier.citationМетрологическое обеспечение дозиметрии гамма-излучения с энергией до 10 МэВ для приборов радиационной защиты = Metrological Support of Dosimetry Gamma-Ray with Energy to 10 MeV for Radiation Protection Devices / Д. И. Комар и др. // Приборы и методы измерений : научно-технический журнал. - 2017. – Т. 8, № 3. – С. 279-285.ru
dc.identifier.urihttps://rep.bntu.by/handle/data/32459
dc.description.abstractПоле высокоэнергетического захватного гамма-излучения для калибровки приборов радиационной защиты можно получить в результате захвата тепловых нейтронов на мишенях из титана (до 7 МэВ) и никеля (до 10 МэВ). Целью данной работы являлось исследование полей захватного гамма-излучения от мишеней из титана и никеля, полученных с использованием облучателя поверочной установки нейтронного излучения УПН-АТ140 для обеспечения дозиметрии до 10 МэВ. В ходе работы определены энергетические интервалы, в которых можно калибровать дозиметрические приборы с учетом сопутствующего выходу нейтронов источника ²³⁸PuBe гамма-излучения захватного излучения материалов коллиматора и захватного излучения от мишеней. Для измерения мощности кермы в воздухе гамма-излучения использовался эталонный дозиметр ДКС-АТ5350 с ионизационной камерой ТМ32002. С помощью Монте-Карло моделирования получено энергетическое распределение мощности кермы в воздухе для мишеней. Установлены геометрические размеры равномерного поля и интервал рабочих расстояний установки. Исследованы характеристики полей захватного излучения от мишеней из титана и никеля, полученных на поверочной установке нейтронного излучения УПН-АТ140 с целью метрологического обеспечения дозиметрических приборов радиационной защиты. Показана возможность проведения калибровки дозиметрических приборов в таких полях в расширенном энергетическом диапазоне до 10 МэВ.ru
dc.language.isoruru
dc.publisherБНТУru
dc.titleМетрологическое обеспечение дозиметрии гамма-излучения с энергией до 10 МэВ для приборов радиационной защитыru
dc.title.alternativeMetrological Support of Dosimetry Gamma-Ray with Energy to 10 MeV for Radiation Protection Devicesen
dc.typeArticleru
dc.identifier.doi10.21122/2220-9506-2017-8-3-279-285
local.description.annotationThe field of high-energy gamma-ray for the calibration of radiation protection devices can be obtained by capturing thermal neutrons from titanium target (to 7 MeV) and nickel target (to 10 MeV). The aim of this work was to determine the metrological characteristics of capture gamma-ray fields from titanium target and nickel target obtained at the AT140 Neutron Calibration Facility to provide dosimetry up to 10 MeV. We have chosen energy intervals in which we can calibrate dosimetry devices taking into account the accompanying generation of gamma-ray neutrons by the fast neutron source ²³⁸PuBe, the capture radiation of collimator materials and capture radiation from targets. We measured air kerma rate with the aid of the reference AT5350 dosimeter with the ionization chamber TM32002. Using the Monte-Carlo simulation, we obtained the energy distribution of the air kerma rate for targets. We determined the geometric dimensions of the uniform field and the interval of operating distances of the facility. We investigated the metrological characteristics of capture gamma-ray fields from titanium target and nickel target obtained at the AT140 Neutron Calibration Facility for dosimetric radiation protection devices. We showed that in such fields it is possible to calibrate dosimetry devices in the extended energy range up to 10 MeV.en


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record