Белорусский национальный технический университет
Repository of the Belarusian National Technical University
ISSN: 2310-7405
Repository of the Belarusian National Technical University
View Item 
  •   Repository BNTU
  • Сериальные издания
  • Наука и Техника
  • 2025
  • № 3
  • View Item
  •   Repository BNTU
  • Сериальные издания
  • Наука и Техника
  • 2025
  • № 3
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Влияние угла наклона режущей кромки вращающегося инструмента на силу резания при скоростной обработке сложнопрофильных поверхностей деталей на станках с ЧПУ

Thumbnail
DOI
10.21122/2227-1031-2025-24-3-204-216
Authors
Попок, Н. Н.
Анисимов, В. С.
Date
2025
Publisher
БНТУ
Another Title
Effect of the Angle of Inclination of the Cutting Edge of a Rotating Tool on the Cutting Force during High-Speed Machining of Complex-Profile Surfaces of Parts on CNC Machines
Bibliographic entry
Попок, Н. Н. Влияние угла наклона режущей кромки вращающегося инструмента на силу резания при скоростной обработке сложнопрофильных поверхностей деталей на станках с ЧПУ = Effect of the Angle of Inclination of the Cutting Edge of a Rotating Tool on the Cutting Force during High-Speed Machining of Complex-Profile Surfaces of Parts on CNC Machines / Н. Н. Попок, В. С. Анисимов // Наука и техника. – 2025. – № 3. – С. 204-216.
Abstract
Целью работы является повышение производительности обработки сложнопрофильных поверхностей деталей на станках с ЧПУ. Для достижения поставленной цели решается задача исследования составляющих сил резания при обработке заготовок вращающимся инструментом с крутонаклонной режущей кромкой на различных режимах резания. Применяются теоретический и экспериментальный методы исследований. В результате теоретических исследований получены формулы для расчета нормальной силы резания при обработке плоской поверхности вращающейся детали концевой фрезой, учитывающие влияние угла наклона режущей кромки и соотношения составляющих силы резания. Установлен диапазон изменения угла наклона режущей кромки, обеспечивающий снижение силы резания. Для проверки теоретических зависимостей проведены экспериментальные исследования составляющих силы резания при обработке заготовки из алюминиевого сплава Д16Т концевыми фрезами различных фирм-производителей. С использованием специального программно-измерительного комплекса получены осциллограммы амплитудных изменений составляющих силы резания при различных значениях глубины резания и врезания, подачи на зуб и скорости резания. Установлены зависимости влияния угла наклона режущей кромки на силу резания, подтверждающие результаты теоретических исследований. Определены значения поправочных коэффициентов на скорость резания, учитывающие угол наклона режущей кромки инструмента и свойства обрабатываемого материала, что позволяет корректировать значения скорости резания и обеспечить повышение производительности обработки до двух раз.
Abstract in another language
The aim of the work is to increase the productivity of processing complex-profile surfaces of parts on CNC machines. To achieve this goal, the task of studying the components of cutting forces when processing workpieces with a rotating tool with a steeply inclined cutting edge in various cutting modes is solved. Theoretical and experimental research methods are used. As a result of theoretical research, formulas have been obtained for calculating the normal cutting force when processing a flat surface of a rotating part with an end mill, taking into account the influence of the angle of inclination of the cutting edge and the ratio of the components of the cutting force. The range of change in the angle of inclination of the cutting edge is set, which reduces the cutting force. To verify theoretical dependencies, experimental studies of the components of the cutting force were carried out when processing a billet made of aluminum alloy D16T with end mills from various manufacturers. Using a special software and measuring complex, oscillograms of amplitude changes in the components of the cutting force at different values of cutting depth and embedding, feed to the tooth and cutting speed were obtained. The dependences of the influence of the cutting edge inclination angle on the cutting force are established, confirming the results of theoretical studies. The values of the correction coefficients for the cutting speed are determined, taking into account the angle of inclination of the cutting edge of the tool and the properties of the processed material, which allows to adjust the values of the cutting speed and ensure an increase in processing productivity up to two times.
URI
https://rep.bntu.by/handle/data/157724
View/Open
204-216 (4.119Mb)
Collections
  • № 3[8]
Show full item record
CORE Recommender

Belarusian National Technical University | Science Library | About Repository | Размещение в Репозитории | Contact Us
Яндекс.МетрикаIP Geolocation by DB-IP
Science Library | About Repository | Размещение в Репозитории | Contact Us
 

Browse

All of Repository BNTUCommunities & CollectionsAuthorsTitlesBy Issue DatePublisherBy Submit DateTypeThis CollectionAuthorsTitlesBy Issue DatePublisherBy Submit DateType

My Account

LoginRegister

Belarusian National Technical University | Science Library | About Repository | Размещение в Репозитории | Contact Us
Яндекс.МетрикаIP Geolocation by DB-IP
Science Library | About Repository | Размещение в Репозитории | Contact Us