Белорусский национальный технический университет
Repository of the Belarusian National Technical University
ISSN: 2310-7405
Repository of the Belarusian National Technical University
View Item 
  •   Repository BNTU
  • Сериальные издания
  • Литье и металлургия
  • 2025
  • № 2
  • View Item
  •   Repository BNTU
  • Сериальные издания
  • Литье и металлургия
  • 2025
  • № 2
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Разделительное покрытие для получения песчано‑смоляных стержней, изготавливаемых по нагреваемой оснастке

Thumbnail
DOI
10.21122/1683-6065-2025-2-46-51
Authors
Пивоварчик, А. А.
Date
2025
Publisher
БНТУ
Another Title
Release coating for obtaining sand‑resin rods manufactured using heated tools
Bibliographic entry
Пивоварчик, А. А. Разделительное покрытие для получения песчано‑смоляных стержней, изготавливаемых по нагреваемой оснастке = Release coating for obtaining sand‑resin rods manufactured using heated tools / А. А. Пивоварчик // Литье и металлургия. - 2025. - № 2. - С. 46-51.
Abstract
В статье представлены результаты исследований по разработке современного состава разделительного покрытия, используемого для изготовления песчано‑смоляных стержней по нагреваемой оснастке с высокими технологическими свойствами. Установлено, что условная вязкость разрабатываемых составов смазок снижается при добавлении к полиметилсилоксановой жидкости олеиновой кислоты в количестве от 5 до 25 % с 10 до 8 с, а плотность смазок – с 908 до 882 кг/м3. При добавлении к основе 15 % олеиновой кислоты отмечается повышение седиментационной устойчивости смазки более чем в 30 раз. Показано, что наилучшими технологическими и потребительскими свойствами обладает разработанный состав смазки при следующем соотношении компонентов: основа (полиметилсилоксановая жидкость ПМС 300) – 15 %, добавка (олеиновая кислота) – 15 %, поверхностно‑активное вещество (ПАВ) – 3,0 %, вода – остальное. Результаты исследований могут быть использованы инженерами‑технологами при выборе состава смазки для изготовления стержней по нагреваемой оснастке.
Abstract in another language
The article presents the results of research on the development of the lubricant composition for the production of sand‑resin rods over a heated tooling with high technological and consumer properties. It has been established that the conditional viscosity of the developed lubricant compositions decreases when oleic acid is added to the polymethylsiloxane liquid in an amount of 5 to 25 % from 10 to 8 s, and the density of lubricants is reduced from 908 to 882 kg/m3. It has been established that when oleic acid is added to the base in an amount of 15 %, the sedimentation stability of the lubricant is increased by more than 30 times. It is shown that the developed lubricant composition has the best lubrication characteristics at the following component ratio: base (polymethylsiloxane liquid PMS 300) 15 %, additive (oleic acid) 15 %, surfactant 3,0 %, water – the rest. The results of the research can be used by the process engineers when choosing the composition of the lubricant for making rods by the heated tooling.
URI
https://rep.bntu.by/handle/data/157447
View/Open
46-51 (367.3Kb)
Collections
  • № 2[14]
Show full item record
CORE Recommender

Belarusian National Technical University | Science Library | About Repository | Размещение в Репозитории | Contact Us
Яндекс.МетрикаIP Geolocation by DB-IP
Science Library | About Repository | Размещение в Репозитории | Contact Us
 

Browse

All of Repository BNTUCommunities & CollectionsAuthorsTitlesBy Issue DatePublisherBy Submit DateTypeThis CollectionAuthorsTitlesBy Issue DatePublisherBy Submit DateType

My Account

LoginRegister

Belarusian National Technical University | Science Library | About Repository | Размещение в Репозитории | Contact Us
Яндекс.МетрикаIP Geolocation by DB-IP
Science Library | About Repository | Размещение в Репозитории | Contact Us