Now showing items 21-31 of 31

    • System Eliminating Emergency Discharges in Industrial Facilities Waste Waters Using Relative Signal Description 

      Alekseev, V. A.; Yuran, S. I.; Usoltsev, V. P.; Shulmin, D. N. (БНТУ, 2022)
      Peak emergency discharges of harmful substances to the industrial companies waste waters that normally form coagulates over time present a serious environmental problem. These coagulates can enter natural water bodies during the wastewater discharge. Thus, detecting these coagulates in real-time is a relevant problem. To solve this problem, the authors suggest building an automated ...
      2022-07-06
    • Diffuse Reflectance Spectrophotometers Based on C12880MA and C11708MA Mini-Spectrometers Hamamatsu 

      Firago, V. A.; Levkovich, N. V.; Shuliko, K. I. (БНТУ, 2022)
      Diffuse reflection spectroscopy with spatial resolution is a promising direction of non-destructive control of the properties of a number of scattering fine-dispersed materials, including food products. It can find wide practical application only in the presence of compact, easy-to-use and inexpensive spectrophotometric equipment. The aim of the article is to investigate the ...
      2022-07-05
    • Prediction of Dynamic Characteristics of Thermocouples with Thin-Wire Sensing Elements 

      Safina, I. A.; Artemyeva, S. A. (БНТУ, 2022)
      Thermocouples dynamic characteristicsʼ prediction is one of the relevant directions in the field of dynamic measurements of non-stationary temperatures of liquid and gaseous media. Thermocouples dynamic characteristicsʼ prediction makes it possible to provide effective continuous correction in automatic control systems for non-stationary temperatures. The purpose of this paper ...
      2022-07-05
    • Assessing of a Radiation Therapy Sessionʼs Duration at the Stage of Pre-Radiation Preparation 

      Piatkevich, M. N.; Titovich, E. V. (БНТУ, 2022)
      The treatment planning process includes a review of the radiation treatment plan which leads to a decision on the patientʼs treatment technique. The scope of this study was to create a mathematical model for calculating of a radiation therapy session duration during the pre-radiation planning stage. For dosimetric planning of radiation treatment the authors provided a formula and ...
      2022-04-06
    • Analysis of Illumination Generated by LED Matrices Distribution 

      Bogdan, P. S.; Zaytseva, E. G.; Baranov, P. O.; Stepanenko, A. I. (БНТУ, 2022)
      Сreation of indoor lighting systems with the possibility of changing its parameters in space and time is a promising direction within the framework of the intellectual environment system. The aim of this work was to create a methodology for calculating the illumination created by LED matrices which does not require the use of specialized software products and is adapted to the ...
      2022-04-06
    • Method for Increasing of Lens Gluing Technological Process Efficiency and a Reliable Evaluation of Output Controlled Parameters 

      Fiodоrtsev, R. V.; Metelskaya, E. A.; Marchik, V. A.; Kuznetsov, A. V.; Makarevich., A. E. (БНТУ, 2022)
      The use of glued lens components in optical devices improves the image quality of telescopic and photographic lenses or inverting systems by eliminating a number of aberrations, and also reduces light losses in the optical system of the device. The traditional production process of lenses gluing involves the sequential execution of a set of technological operations and takes a ...
      2022-04-06
    • Methods for Accuracy Increasing of Solid Brittle Materials Fracture Toughness Determining 

      Lapitskaya, V. A.; Kuznetsova, T. A.; Chizhik, S. A.; Warcholinski, B. (БНТУ, 2022)
      Method for determining of the fracture toughness of brittle materials by indentation is described. The critical stress intensity factor KIC quantifies the fracture toughness. Methods were developed and applied to improve the accuracy of KIC determination due to atomic force microscopy and nanoindentation. It is necessary to accurately determine parameters and dimensions of the ...
      2022-04-06
    • Determination of 238U Content by Gamma Radiation Emitting from 234mPa Radionuclide 

      Khruschinski, Arkadiy; Kutsen, Semen; Zhukouski, Alex; Sugai, Naoyuki; Sugai, Hiroshi; Mogi, Michinori (БНТУ, 2022)
      Radionuclide 238U is one of the most important radioactive elements that must be controlled in nuclear power engineering, geological exploration, control of radioactive contamination of soils and raw materials used in construction. The most optimal way to control 238U is to use the 234mPa radionuclide, the activity of which, due to its short lifetime (≈ 1.2 min), is unambiguously ...
      2022-04-05
    • Compact Passively Q-Switched Tm:KY(WO4)2 Laser 

      Kisel, V. E. (БНТУ, 2022)
      Diode-pumped thulium lasers emitting in the spectral range near 2 μm are attractive for applications in different areas: surgery, rangefinding, and environmental atmosphere monitoring. In this article the latest results of Tm:KYW laser performance with a polycrystalline Cr:ZnSe as the most available saturable absorber for 2 μm spectral region are presented. A maximum continuous-wave ...
      2022-04-05
    • Кристалл Er3+,Yb3+:YGdSiO5 для лазеров спектрального диапазона 1,5–1,6 мкм 

      Горбаченя, К. Н.; Ясюкевич, А. С.; Кисель, В. Э.; Толстик, Н. А.; Тараченко, А. А.; Гоман, В. И.; Павловский, Л. К.; Орлович, В. А.; Волкова, Е. А.; Япаскурт, В. О.; Кулешов, Н. В. (БНТУ, 2022)
      Твердотельные эрбиевые лазеры, излучающие в спектральной области 1,5–1,6 мкм, представляют большой интерес для различных практических применений. Из доступных на сегодня лазерных материалов для получения стимулированного излучения в области 1,5 мкм наибольшее распространение получили фосфатные стёкла, легированные ионами Er3+. Однако максимальные выходные мощности таких лазеров ...
      2022-04-04
    • Devices and Methods for Measuring of the Ambient Air Dust. Short Review 

      Mukhurov, N. I.; Khodin, A. A.; Kim, Y.-J. (БНТУ, 2022)
      The main characteristics of airborne micro/nanoparticles, their impact on human health and air quality standards are presented. International standards classify microparticles by size (PM10, PM2.5, PM1, UFP), establish maximum allowable concentrations and control methods. Particular attention is paid to carbonand virus-containing microparticles control. To monitor the air environment ...
      2022-04-01