Browsing Наука и Техника by Title

Now showing items 29-48 of 881

    • Design Features when Using an Effective Microturbine as a Range Extending Engine 

      Nadareishvili, G.; Kostyukov, A.; Karpukhin, K. (БНТУ, 2019)
      The rapid development of electric vehicles stimulates the development of structures related to their operation. Including the use of the range extending engine for electric vehicles. The use of gas turbine engines for vehicles has always been of interest. The microturbine in the range extending engine is relevant today. However, the possibility of using a microturbine as part of ...
      2019-12-06

    • Detection of Reflexive Signs in Town Planning Systems of Ukraine and Republic of Belarus 

      Smilka, V. A. (БНТУ, 2018)
      As a city is a complex system, it complies with the principles pertaining to organization and management of systems. System analysis makes it possible to figure out the difference between managing systems (subject) from systems that are managed (object). There is a link between these system formations which unites them in a common system. Such relationship is a source of information ...
      2018-04-11

    • Development of Technological Solutions for Sewer Rehabilitation Using Clinker Brick 

      Goncharenko, D. F.; Aleinikova, A. I.; Yesakova, S. V.; Hudilin, R. I. (БНТУ, 2021)
      The aim of the work is to develop a technology for the restoration of damaged sections of sewer collectors using clinker bricks. A significant part of such collectors in the Ukraine has completely exhausted their depreciation resource. For their construction, concrete and reinforced concrete were used, which are subject to destruction as a result of the influence of many factors ...
      2021-12-02

    • Development of Wear Resistant Coatings Formed by Plasma Spraying of Alloy Ni–Fe–Cr–Si–B–C System Reinforced with Ceramics Al2O3 

      Kalinichenko, A. S.; Devoino, O. G.; Meshkova, V. V. (БНТУ, 2016)
      Создание функционально ориентированных, в том числе наноструктурированных, антифрикционных материалов и покрытий, обладающих качественно новым комплексом служебных свойств, является важной научной и практической задачей. В частности, для кабельного производства актуальна задача обеспечения высоких эксплуатационных свойств быстроизнашивающихся протягивающих и поддерживающих роликов ...
      2016-09-27

    • Electric Propulsion Systems Design Supported by Multi-Objective Optimization Strategies 

      Hirz, M.; Hofstetter, M.; Lechleitner, D. (БНТУ, 2019)
      Electric drive systems consisting of battery, inverter, electric motor and gearbox are applied in hybrid- or purely electric vehicles. The layout process of such propulsion systems is performed on system level under consideration of various component properties and their interfering characteristics. In addition, different boundary conditions are taken under account, e. g. ...
      2019-12-06

    • Electronic Lexicography: Traditional and Modern Approaches 

      Маkarych, М. V.; Popova, Yu. B.; Shved, M. O. (БНТУ, 2020)
      Nowadays there are a lot of modern technologies in electronic lexicography: speech synthesis technology, crossreferencing between dictionary modules, spell-checking functions, etc. The increasing availability of online information has necessitated intensive research in the area of automatic text summarization within the Natural Language Processing community. Belarusian scientists ...
      2020-10-02

    • Engineering of Light Electric Commercial Vehicle 

      Dorofeev, R.; Tumasov, A.; Sizov1, A.; Kocherov, A.; Meshkov, A.; Porubov, D. (БНТУ, 2020)
      The paper describes the process and results of the development of the light commercial electric vehicle. In order to ensure maximum energy efficiency of the developed vehicle the key parameters of the original electric motor. The article also presents the results of power electronic thermal calculation. For the mathematical model of the vehicle, the driving cycle parameters of ...
      2020-02-04

    • Ensuring Requirements for Emissions of Harmful Substances of Diesel Engines 

      Kuharonak, G. M.; Kapskiy, D. V.; Berezun, V. I. (БНТУ, 2020)
      The purpose of this work is to consider the requirements for emissions of harmful substances of diesel engines by selecting design and adjustment parameters that determine the organization of the workflow, and the exhaust gas cleaning system, taking into account the reduction of fuel consumption. Design elements and geometric characteristics of structures for a turbocharged diesel ...
      2020-08-04

    • Evaluation of Evaporative Degradation of Arc Torch Cathodes in Hydrocarbon-Containing Plasmas for Spraying, Thermal Protection Testing and Related Technologies 

      Gorbunov, A. V.; Gorbunova, V. A.; Devoino, O. G.; Petraconi, Filho G.; Halinouski, A. A. (БНТУ, 2022)
      Design of non-transferred DC electric arc plasma torches (EAPTs) operated with plasma gases containing alkane hydrocarbons, as a promising type of heaters for a number of technologies (thermal spraying, surface hardening, testing of thermal protection systems, etc.), requires taking into account the evaporation rate of surface cathode material (as one of the channels of its ...
      2022-06-09

    • Experimental Determination and Comparative Analysis of the PPH030GP, ABS and PLA Polymer Strength Characteristics at Different Strain Rates 

      Zalohin, M. Yu.; Skliarov, V. V.; Dovzhenko, Ja. S.; Brega, D. A. (БНТУ, 2019)
      Nowadays the field of application of products made from polymer materials is constantly increasing. These products find their wide application in the most high-tech industries such as automotive, aerospace and medical industry. Modern trends in the development of the automotive industry predicts that 75 % of the total car mass will be replaced with polymer materials by 2020 and ...
      2019-07-04

    • Features of Controlling Electropneumatic Valves of Actuator to Control its Clutch with Acceleration Valve 

      Yaryta, O. А.; Mychalevych, M. G.; Leontiev, D. N.; Klymenko, V. I.; Bogomolov, V. A.; Gritsuk, I. V.; Novikova, Y. B. (БНТУ, 2018)
      The article deals with one of the ways to control an actuator of the automated clutch control system. The aim is to design control of the electropneumatic actuator, to control its coupling with the acceleration valve on the basis of experimental research as well as to provide rational parameters of the automated clutch control system for the robotic transmission. The feature of ...
      2018-02-09

    • Finite Element Method Analysis of Centreless-Lunette Turning of Heavy Shafts 

      Vasilevich, Yu. V.; Dounar, S. S. (БНТУ, 2017)
      Dynamics of heavy lathe tool ta be renovated has been simulated in the paper. Original turning scheme concerns finish-machining of large rotor shafts. High-positioned parts and a milling head may create dynamic problems. For this very reason FEM-simulation has been carried in static, modal and harmonic arrangements. A carrying system for shaft support consists of a bed, a support, ...
      2017-05-29

    • Forecasting the Risk of Bankruptcy in Poorly Formalized Processes 

      Gaibnazarova, Z. T.; Solieva, B. T.; Iminova, N. A. (БНТУ, 2024)
      There is a class of complex systems characterized by dynamism, multi-link structural elements, multi-stage, multi-linked chain of processes. Moreover, each of these processes occurs under conditions of stochastic and non-stochastic uncertainty in the initial information, internal and external environment, which predetermine the uncertainty of the nature of the development of the ...
      2024-02-06

    • Fuel Consumption of Wheeled Vehicle and Transportation Costs during Highway Construction/Reconstruction 

      Leontiev, D. N.; Ihnatenko, A. V.; Synkovska, O. V.; Ryzhikh, L. А.; Smirnova, N. V.; Aleksandrov, Yu. V.; Rudenko, N. V. (БНТУ, 2021)
      A method is proposed for determining the fuel consumption of a wheeled vehicle depending on its speed, road surface flatness and road slope in the longitudinal direction. The purpose of the research is to derive mathematical relationships for calculating the fuel consumption of vehicles, which is one of the transport cost factors during the construction/ reconstruction or overhaul ...
      2021-12-02

    • Heat-Resistant Foam Concrete on the Basis of Two-Component Binder 

      Leonovich, S. N.; Sviridov, D. V.; Belanovich, A. L.; Savenko, V. P.; Karpushenkov, S. A. (БНТУ, 2019)
      The composition of dry mix on the basis of two-component cementing agent (aluminous cement and clay of the “Kustikha” field), mineral additives (a metakaolin, the RSAM sulfoaluminate modifier, waste of basalt fiber), Ufapore foamer and the accelerating and plasticizing “Citrate-T” additive is developed. When mixing “Citrate-T” additive with water at Water/Solid = 0.45–0.70, the ...
      2019-04-16

    • How to Make the Charging Simple, Convenient and Efficient 

      Cheng, W.; Wang, Y. (БНТУ, 2020)
      With the large-scale application of electric vehicles (EV) in the world and also in China, the contradiction between the EV and charging stations has become more and more prominent. People always cannot easily find the charging stations or when they find them finally found they do not work. To connect the vehicle, charging station/pile and end-users for making the charging simple, ...
      2020-02-04

    • Imitating a Safe Human Driver Behaviour in Roundabouts Through Deep Learning 

      Cervera, A. S. J.; Alonso, F. J.; Garcia, F. S.; Alvarez, A. D. (БНТУ, 2020)
      Roundabouts provide safe and fast circulation as well as many environmental advantages, but drivers adopting unsafe behaviours while circulating through them may cause safety issues, provoking accidents. In this paper we propose a way of training an autonomous vehicle in order to behave in a human and safe way when entering a roundabout. By placing a number of cameras in our ...
      2020-02-04

    • Improving Properties of Tool Steels by Method of Dynamic Alloying 

      Kalinichenko, A. S.; Ovchinnikov, V. I.; Usherenko, S. M.; Yazdani-Cherati, Javad F. (БНТУ, 2019)
      The influence of high-speed particle fluxes on changes in the structure and properties of materials has been widely studied currently. The effect exerted by particles moving at very high speeds can have both negative (in spacecrafts) and positive character (dynamic processing of tool steels). Therefore a task for studying an effect of high-speed particle flows on structure change ...
      2019-10-21

    • Improving the Brake Control Effectiveness of Vehicles Equipped with a Pneumatic Brake Actuator 

      Bogomolov, V.; Klimenko, V.; Leontiev, D.; Ryzhyh, L.; Smyrnov, O.; Kholodov, M. (БНТУ, 2020)
      This paper proposes a way to determine a rational connection between a two-section or three-section brake valve and the main brake system circuits of a wheeled vehicle equipped with simplex or duo-duplex brake gears. The aim is to determine a rational option to connect main brake system circuits with a brake valve to guarantee the maximum effectiveness of an emergency brake system ...
      2020-02-04

    • Improving the Energy Performance of Traction Electric Drive Vehicles in Solving Electric Braking 

      Herasymenko, V.; Shpika, N.; Smyrnyi, M.; Khuruzha, D. (БНТУ, 2021)
      The effectiveness of the electric braking system largely depends on how the braking is carried out, whether the braking characteristics that it forms are acceptable for a given vehicle, how simple and reliable the technical solutions embedded in the system are, and where the braking energy is used. With electric braking, it is possible not only to extinguish the electrical energy ...
      2021-02-04