Show simple item record

dc.contributor.authorБладыко, Ю. В.
dc.contributor.authorПономаренко, Е. Г.
dc.coverage.spatialМинскru
dc.date.accessioned2021-04-07T12:00:15Z
dc.date.available2021-04-07T12:00:15Z
dc.date.issued2021
dc.identifier.citationБладыко, Ю. В. Механический расчет гибких токопроводов с учетом отпаек к электрическим аппаратам = Mechanical Calculation of Flexible Wires Taking into Account Taps to Electrical Apparatuses / Ю. В. Бладыко, Е. Г. Пономаренко // Энергетика. Известия высших учебных заведений и энергетических объединений СНГ. – 2021. – № 2. – С. 109-120.ru
dc.identifier.urihttps://rep.bntu.by/handle/data/90005
dc.description.abstractПредложена методика механического расчета гибких проводов распределительного устройства при наличии одной отпайки к электрическому аппарату, расположенной в середине пролета, с учетом ее реального расположения. Принимаются во внимание наличие натяжных гирлянд изоляторов, разные высоты подвеса проводов. Нагрузки на токопровод и отпайку зависят от климатического режима, ветровых и гололедных условий, а также изменения температуры. Переход к другому климатическому режиму выполняется решением уравнения состояния с учетом коэффициентов горизонтальной и вертикальной нагрузки данного и исходного режимов. Приводятся формулы для определения коэффициентов нагрузки, учитывающих весовые, ветровые и гололедные нагрузки на провода и гирлянды изоляторов, а также наклон пролета. Расчеты производятся для каждого климатического режима исходя из реального расположения отпайки к электрическому аппарату и усилий от нее на ошиновку. Показано хорошее совпадение результатов, полученных по предложенной методике и с помощью компьютерной программы. Приведены формулы для расчета стрелы провеса и горизонтальных отклонений токопроводов при расположении отпайки в середине пролета. Предложена методика определения составляющих усилий на ошиновку от отпайки с учетом ее реального расположения в распределительном устройстве. Даны формулы расчета этих составляющих для разных вариантов ориентации отпайки. Знание значений составляющих сосредоточенных сил от отпайки позволяет повысить точность расчета стрел провеса и тяжений токопроводов распределительных устройств. Приведены формулы для определения коэффициентов увеличения стрелы провеса с учетом составляющих сил от отпайки.ru
dc.language.isoruru
dc.publisherБНТУru
dc.titleМеханический расчет гибких токопроводов с учетом отпаек к электрическим аппаратамru
dc.typeArticleru
dc.identifier.doi10.21122/1029-7448-2021-64-2-109-120
local.description.annotationA method is proposed for the mechanical calculation of flexible wires of substation in the presence of one tap to an electrical apparatus located in the middle of the span, taking into account its real location. The technique takes into account the presence of tension insulators strings, different heights of the suspension of wires. The loads on the conductor and tap depend on the climatic regime and take into account wind and icy conditions, as well as temperature changes. The transition to another climatic regime is performed by solving the equation of state, taking into account the coefficients of the horizontal and vertical load of the given and initial regimes. Formulas are given for calculating load factors that take into account weight, wind and ice cover loads on wires and insulator strings, as well as the slope of the span. They are calculated for each climatic mode based on the actual location of the tap to the electrical apparatus and the forces from it to the busbar. It is shown that the calculation results are in good agreement with the proposed method and the computer program. Formulas are given for calculating the sag and horizontal deviations of the wires when the tap is located in the middle of the span. A method is proposed for calculating the components of the forces on the busbar from the tap, taking into account its real location in substation. Formulas for calculating these components are given for different variants of the tap orientation. Knowledge of the values of the components of concentrated forces from the tap allows to increase the accuracy of calculating the sag and tension of the substation wires. Formulas are given for calculating the coefficients of increasing the sag, taking into account the components of the forces from the tap.ru


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record