Семинары и конкурсы: Recent submissions

Now showing items 601-620 of 1390

    • 移动空气检测 

      Li, Yehao; Sun, Mingquan; Wang, Xining (БНТУ, 2021)
      In some places with poor environmental quality, artificial air testing should be avoided to reduce risks. The work is named "Mobile Air Detection", that is, the focus of this work is "mobile" and "air detection".
      2021-06-17

    • 高性能煤矿机械用易焊接Q890 钢的制备 

      Yang, Kang; Guo, Jia; Yang, Senyu (БНТУ, 2021)
      At present, the welding performance of Q890 steel used in production is poor, mainly manifested in the low welding heat input, less than 20kJ/cm, which cannot meet the requirements of robot welding. In this experiment, thermal simulation test was used to study the microstructure and properties of heat-affected zone (HAZ) of Q890 steel after composition optimization under different ...
      2021-06-17

    • Ретрофит технологического процесса сортировки почтовых отправлений 

      Товпеко, А. Д.; Бармина, А. Д. (БНТУ, 2021)
      A new system is proposed that allows robotizing and automating the technological process for processing postal items. This system includes: sorting equipment, server hardware and software. The system is capable of providing high-speed sorting of items in all available postal directions in Belarus.
      2021-06-17

    • 基于TRIZ 理论的可移动式轨道车辆减振器 

      Feng, Xiankun; Li, Dapeng; Yu, Honghao; Yuan, Mingyang; Yi, Fengzhu; Wang, Shuang; Shen, Wei (БНТУ, 2021)
      In this paper, by using TRIZ theory to design a kind of portable railway vehicle shock absorber, by setting the two sets of telescopic spring, the damping device installed on the rail transit vehicles, the rail transit vehicles encountered turbulence, when placed on the buffer spring shaft, two supporting blocks by two sets of telescopic spring to rebound when the safety effect, ...
      2021-06-17

    • Многоцелевой управляемый аппарат на базе контроллера NodeMCU V3 ESP8266 (CH340) для проведения исследовательских и поисковых работ 

      Торопов, В. В.; Боровская, В. И. (БНТУ, 2021)
      The purpose of the work is to create a working model of a multipurpose controlled device based on the wireless module NodeMcu V3 for observation, research and search work and the development of an algorithm for its behavior. To achieve the goal, the following tasks were set: 1. To study the features of building robots based on NodeMcu V3 boards. 2. Analyze the studied material, ...
      2021-06-17

    • Effect of alloying on the corrosion performance of as-rolled Mg-4Li alloys 

      Jianchun, Sha (БНТУ, 2021)
      Mg-4Li alloys with the addition of Al, Si, Y elements were prepared by vacuum melting and rolling process. The microstructure, electrochemical corrosion of the alloys are investigated. The results indicate that the grain size and the second phase are modulated with the addition of Al and Y elements compared with the Mg-4Li alloy, the corrosion resistance is enhanced significantly. ...
      2021-06-17

    • Информационные технологии виртуальной реальности 

      Поплевко, А. Н. (БНТУ, 2021)
      Описаны перспективы развития информационных технологий в разрезе виртуального измерения.
      2021-06-17

    • Установка порционного смешивания пищевых жидкостей 

      Хаммуда, Иссам Ибрагим (БНТУ, 2021)
      Хаммуда, Иссам Ибрагим. Установка порционного смешивания пищевых жидкостей / Иссам Ибрагим Хаммуда // II Китайско-белорусский молодежный конкурс научно-исследовательских и инновационных проектов : сборник материалов конкурса, 20-21 мая 2021 г. / Белорусский национальный технический университет ; Научно-технологический парк БНТУ «Политехник» ; Институт Конфуция по науке и технике ...
      2021-06-17

    • Цифровая платформа «Инклюзивное образование» в Республике Беларусь 

      Савенко, А. Г. (БНТУ, 2021)
      The project "Inclusive Education" is being implemented by the UNESCO Chair on Vocational Education in the Field of Information and Communication Technologies for Persons with Special Needs of the Institute of Information Technology of the Belarusian State University of Informatics and Radioelectronics and is aimed at creating a digital platform and its content for people with ...
      2021-06-17

    • Научная секция «материалы и химические продукты. Машиностроение и металлургия» 

      Chen, Jianjin; Yu, Xiaoye (БНТУ, 2021)
      In this study, Al1-xInxN films with different band gap energy (Eg) were deposited by radiofrequency (RF) magnetron sputtering. The Eg of films shows a red-shift from 2.95 to 2.20 eV. We investigated the photo-response behaviors of the as-grown films under the illumination of LED with a center wavelength of 365, 532, and 650 nm, respectively. The wavelength of the detected light ...
      2021-06-17

    • Application of graphene transducing layer in all-solid PB2+ selective electrode 

      Duan, Lei (БНТУ, 2021)
      At present, the problem of water and metal pollution in China is becoming more and more prominent. Among them, the problem of lead pollution cannot be neglected, and it is particularly important to select an appropriate method to detect the content of heavy metal lead ions. In this paper, Graphene was used as solid-state transfer layer to prepare all-solid ion-selective electrode ...
      2021-06-17

    • PYTHON 程序设计 

      Li, Kai (БНТУ, 2021)
      Li, Kai. PYTHON 程序设计 / Kai Li // II Китайско-белорусский молодежный конкурс научно-исследовательских и инновационных проектов : сборник материалов конкурса, 20-21 мая 2021 г. / Белорусский национальный технический университет ; Научно-технологический парк БНТУ «Политехник» ; Институт Конфуция по науке и технике БНТУ. – Минск : БНТУ, 2021. – С. 21.
      2021-06-17

    • Внедрение технологий Big Data и Smart Data в современный маркетинг предприятий 

      Пилипенко, В. Д.; Проц, Т. А. (БНТУ, 2021)
      The scientific work examines the process of introducing modern Big Data and Smart Data technologies into the marketing of enterprises from the point of view of the effectiveness of the perception of advertising by the target audience and the impact on sales growth.
      2021-06-17

    • KNPV 

      Лапковская, П. И.; Куиш, А.; Миллер, В.; Устинович, К.; Капский, П. (БНТУ, 2021)
      KNPV is a project that combines all the best that is necessary for effective cooperation between carriers and customers in real time. The platform was created with the aim of developing the practice of introducing the GPS monitoring function into the transportation management system, reducing the time for finding transport, as well as optimizing the processes of interaction between ...
      2021-06-17

    • Адаптивный нейросетевой регулятор для управления пьезоэлектрическим двигателем вращения 

      Игнатюк, Н. С. (БНТУ, 2021)
      The article describes: 1) what is the piezoelectric effect and its types; 2) promising areas of application, 3) the complexity of controlling a piezomotor, 4) and a method for solving the complexity of controlling a piezomotor using neural networks.
      2021-06-17

    • Формирование цифровых компетенции персонала организации 

      Подупейко, А. А. (БНТУ, 2021)
      The article discusses the problem of a modern organization – the development of new skills and competencies of personnel in digital activity. There is determination of the main competencies of a modern employee of an organization that has chosen the digital path of development.
      2021-06-17

    • Лазерная система передачи данных 

      Лещенко, А. В.; Толстик, А. С.; Зяблова, Н. П. (БНТУ, 2021)
      The work deals with the technology of improvement the lazer data transmission system and the possibilities of its usage at long distances including mining.
      2021-06-17

    • Модели и средства контроля документов в образовании на базе блокчейн 

      Качан, Д. А.; Вишняков, В. А. (БНТУ, 2021)
      The project discusses the application of blockchain technology to confirm the reliability of education documents. Based on previously developed models, algorithms are presented: issuing a digital document on education, verification of the request, creating a digital copy of the document, the conclusion of a smart contract and the publication of the document, confirmation of its ...
      2021-06-17

    • MK-1 – робот дезинфектор рабочих и жилых помещений 

      Накорнеева, Ю. А.; Очеретний, А. М.; Прохорович, С. С. (БНТУ, 2021)
      Today, an urgent problem is the inability to quickly and efficiently process the room. Microorganism cleaner is a multifunctional robot sanitizer for working and living spaces. The goal of the project is to increase the efficiency of processing the room. Project objectives: to study the effectiveness of the bactericidal action of UV radiation, to develop a special spray gun that ...
      2021-06-17

    • Идеи для продвижения TikTok БНТУ 

      Колонтай, А. А.; Яцко, О. В. (БНТУ, 2021)
      В этой статье рассматривается социальная сеть TikTok и предлагаются идеи для продвижения TikTok БНТУ.
      2021-06-17