Now showing items 1068-1087 of 119149

    • Description on destruction machines and constructions using vibration diagnostics 

      Bogdan, Zoltowski (БНТУ, 2020)
      This paper presents selected problems connected with automation of procedures involved in assessment of machine degradation degree using vibration method with special emphasis on the machine state prognosis. The current knowledge of these problems is not sufficient and needs further research on data processing, analysis of efficiency of diagnostic and prognostic procedures, ...
      2021-01-29
    • Descriptive geometry 

      Hmelnitskaya, L. V.; Matsiushynets, T. V.; Leshkevich, A. U. (BNTU, 2021)
      This textbook is developed for first-year students getting technical specialisations in order to improve their skills of independence work and to provide their study process by additional material. It also can be intended for distance learning case as it contains theoretical material on the descriptive geometry as the first and the fundamental chapter for the course “Engineering ...
      2021-03-16
    • Descriptive geometry 

      Khmelnitskaya, L. V.; Zialiony, P. V.; Matsiushynets, T. V. (BNTU, 2023)
      This student’s book is developed for the first-year students of engineering majors in order to improve their skills at independent work and to provide their study process by additional material. This book is a combination of a textbook and a workbook, that makes her appropriate for classwork. It can also be intended for distance learning case as it contains theoretical material ...
      2023-08-16
    • The design and composition of expansion joints on big-span bridges with intensive heavy-duty traffic 

      Busel, A.; Krotau, R. (2016)
      In the Republic of Belarus the roads with a high intensity of transport most widely employ expansion joints with rubber and steel compensators fastened to the reinforced concrete base with embedded therein studs. While operated expansion joints are exposed to various kinds of operational and climatic impacts causing their damage. Expansion joints destruction results in a sharp ...
      2018-03-10
    • Design and construction of shallow foundations for low-rise residential buildings in Nigeria 

      Alhassan, M. (БНТУ, 2015)
      Alhassan, M. Design and construction of shallow foundations for low-rise residential buildings in Nigeria / M. Alhassan // Современные проблемы внедрения европейских стандартов в области строительства : сборник Международных научно-технических статей (материалы научно-методической конференции), 27–28 мая 2014 г. В 2 ч. Ч. 2 / ред. колл.: В. Ф. Зверев, С. М. Коледа, С. Н. Делендик. ...
      2015-04-09
    • Design and implementation of a RF sensor with single-channel and nonorthogonal IQ signals for non-contacting monitoring 

      Hongrui, Bo; Lisheng, Xu; Jinye, Zhao; Yue, Zhao; Yuanzhu, Dou (БНТУ, 2015)
      In this article, a design of RF (radio frequency) sensor which is based on PCB (Printed Circuit Board) antenna for monitoring physiological parameters is proposed. In order to remotely monitor the activities of heartbeat, respiration and body movement, this article designed and implemented a RF sensor with single-channel and nonorthogonal IQ signals whose working central frequency ...
      2018-04-24
    • Design and implementation of an intelligent circuit analyzer 

      Li, Guanguan; Zhou, Luxing (БНТУ, 2022)
      This paper designs a smart socket based on microcontroller and WIFI module. The socket can measure the voltage information and grounding of the connected circuit, display the measurement results and voice broadcast, and the user can also view the measurement results in real time through the cell phone APP, and design a transparent waterproof box for it to enhance its waterproof ...
      2023-01-24
    • Design and implementation of gas ultrasonic flowmeter system based on max35104 

      Qi, Song; Wenhao, Tong; Jiankai, Tang (БНТУ, 2020)
      In the production, supply, storage and marketing of natural gas industry, gas measurement is a key link. Aiming at solving the problems in the current ultrasonic gas flowmeter, such as high-power consumption, low measurement accuracy and difficult data transmission, an ultrasonic gas flowmeter based on MAX35104 is designed and implemented. The system takes STM32F103 microcontroller ...
      2021-01-26
    • Design and implementation of the turbidity remote monitoring system based on stm32f407 microcontroller 

      Qi, Song; Taoren, Li; Qingwang, Zhang (БНТУ, 2020)
      Facing the developing trend of remote monitoring and real-time early warning of the monitoring system, based on FX -11A optical fiber sensor and the STM32F407 microcontroller, a turbidity remote monitoring system design is completed to monitor turbidity with high precision. According to Lambert-Beer Law and theoretical derivation, the relationship between the reference voltage ...
      2021-01-26
    • Design Features when Using an Effective Microturbine as a Range Extending Engine 

      Nadareishvili, G.; Kostyukov, A.; Karpukhin, K. (БНТУ, 2019)
      The rapid development of electric vehicles stimulates the development of structures related to their operation. Including the use of the range extending engine for electric vehicles. The use of gas turbine engines for vehicles has always been of interest. The microturbine in the range extending engine is relevant today. However, the possibility of using a microturbine as part of ...
      2019-12-06
    • Design in marketing 

      Волынец, Д. М. (БНТУ, 2020)
      Nowadays, a lot of time is spent on promoting various ways of goods and services for the successful implementation of the business. Success depends on the ability to develop new creative products and services. It is also very important to retain the consumer after the purchased product or service. That will promote the share of fame in the market. Revenue and sales play a more ...
      2020-10-05
    • Design of a Round Shaped Cutter 

      Naturyev, I.; Beznis, Y. (БНТУ, 2022)
      Naturyev, I. Design of a Round Shaped Cutter / I. Naturyev, Y. Beznis // Знание иностранного языка как основной фактор для работы в инновационных условиях [Электронный ресурс] : сборник материалов 78-й студенческой научно-технической конференции, 21 апреля 2022 г. / Белорусский национальный технический университет, Факультет горного дела и инженерной экологии ; редкол.: С. А. ...
      2022-06-20
    • Design of Peltier Element Based on Semiconductors with Hopping Electron Transfer via Defects 

      Poklonski, N. A.; Vyrko, S. A.; Kovalev, A. I.; Anikeev, I. I.; Gorbachuk, N. I. (БНТУ, 2021)
      The study of thermoelectric properties of crystalline semiconductors with structural defects is of practical interest in the development of radiation-resistant Peltier elements. In this case, the spectrum of energy levels of hydrogen-like impurities and intrinsic point defects in the band gap (energy gap) of crystal plays an important role. The purpose of this work is to analyze ...
      2021-03-18
    • Design philosophy: digital technologies 

      Loiko, A. I. (BNTU, 2023)
      The textbook complements the lecture material with topical issues of design philosophy and digital technologies. The material belongs to the section "Philosophy of natural science and technology" of the course of lectures on the philosophy and methodology of science. The natural-science aspects of human consciousness and technological trends in the evolution of convergent structures ...
      2023-02-27
    • Design thinking 

      Yasuikevich, A. D.; Beleуchik, E. A. (БНТУ, 2023)
      Yasuikevich, A. D. Design thinking / A. D. Yasuikevich, E. A. Beleуchik ; sci. sup. A. S. Samusevich // Знание иностранного языка как основной фактор для работы в инновационных условиях [Электронный ресурс] : сборник материалов 79-й студенческой научно-технической конференции, 20 апреля 2023 г. / Белорусский национальный технический университет, Факультет горного дела и инженерной ...
      2023-05-25
    • Designing a Planar Fluxgate Using the PCB Technology 

      Kolomeitsev, A. A.; Zatonov, I. A.; Pischanskaya, M. I.; Baranov, P. F.; Ilyaschenko, D. P.; Verkhoturova, E. V. (БНТУ, 2021)
      The development of novel methods, scientific devices and means for measuring magnetic fields generated by ultra-low current is among promising directions in the development of medical equipment and instruments for geodetic surveys and space exploration. The present work is to develop a small sensor capable of detecting weak magnetic fields, which sources are biocurrents, radiation ...
      2021-07-07
    • Designing efficient textbook for teaching chinese students “information technologies in art history” within english-speaking educational environment 

      Filatov, A. Y.; Honcharik, N. G.; Pesetskaya, Т. I. (БНТУ, 2023)
      In the paper, the challenges of teaching Chinese students in Belarus within an English-speaking educational environment are discussed. Main principles of elaborating effective textbooks on special disciplines for supporting educational processes in multicultural students groups are proposed. The successful example of the English-language textbook «Information Technologies in Art ...
      2024-01-17
    • Designing the educational process of the university based on mental characteristics of modern students 

      Чжу, Мяо (БНТУ, 2021)
      Чжу, Мяо. Designing the educational process of the university based on mental characteristics of modern students / Мяо Чжу ; науч. рук. А. М. Романова // Инженерно-педагогическое образование в XXI веке : материалы республиканской научно-практической конференции молодых ученых и студентов (25-26 ноября 2021 г.) / редкол.: А. М. Маляревич (гл. ред.) [и др.]. – Минск : БНТУ, 2021. ...
      2022-03-15
    • Design–bid–build as a project delivery method in Republic of Belarus 

      Grigoryeva, N. A. (БНТУ, 2021)
      Grigoryeva, N. A. Design–bid–build as a project delivery method in Republic of Belarus / N. A. Grigoryeva // Экономика, организация строительства и управление недвижимостью [Электронный ресурс] : сборник материалов научно-технической конференции профессорско-преподавательского состава БНТУ в рамках 19-й Международной научно-технической конференции «Наука – образованию, производству, ...
      2021-10-26
    • Detecting radiation contamination with quadcopter 

      Balukho, I. N.; Miritsky, B. L.; Intyakov, A. N.; Koltsov, I. V.; Dudchik, Y. I.; Kolchevsky, N. N. (БНТУ, 2023)
      The radiation monitoring system is proposed to include ground-based stationary measuring complexes, mobile – wearable, and UAV-based complexes united into a single measuring system with the functions of data accumulation and analysis, display of radiation situation in real time. Radiation monitoring system should provide detection of stationary and mobile sources of ionising ...
      2023-12-21