Browsing Приборы и методы измерений by Title

Now showing items 115-134 of 483

    • Research of ultrasonic sensing and mixing elements for control of magnetorheological fluids stability 

      Dragasius, E.; Jurenas, V.; Maciukiene, V.; Mazeika, D. (БНТУ, 2011)
      Using of magnetorheological fluids (MRF) can reduce energy costs and weight and increase the devices speed and lifetime. In order to fully use all the qualities of MRF properties one must from time to time mix them and measure their properties. These systems are still being designed and tested in the laboratories. There are many structures with rheological fluid, but in many ...
      2012-03-27

    • Series of Photovoltaic Converters Based on Semiconductors with Intrinsic Photoconductivity 

      Vorobey, R. I.; Gusev, O. K.; Zharin, A. L.; Pantsialeyeu, K. U.; Svistun, A. I.; Tyavlovsky, A. K.; Tyavlovsky, K. L.; Shadurskaya, L. I. (БНТУ, 2021)
      One of the ways to solve multiple problems of optical diagnostics is to use photovoltaic converters based on semiconductors with intrinsic photoconductivity slightly doped with deep impurities which form several energy levels with different charge states within the semiconductor′s bandgap. Peculiarities of physical processes of recharging these levels make it possible to construct ...
      2021-07-07

    • Shape and Measurement Monitoring of Inrush Current Characteristics of a Battery-Capacitive Energy Storage Device with Two-Channel Digital Oscilloscope 

      Vasilevich, V. P.; Zbyshinskaya, M. Y. (БНТУ, 2021)
      The main reason of voltage instability in stand-alone power supply systems is the electric drive motors inrush current, which are usually higher than their nominal value. The most reasonable way to solve this problem is using capacitive energy storage. The purpose of research is shape and measurement monitoring of battery-capacitive energy storage device inrush current characteristics. ...
      2021-12-22

    • Simplified method of calorimetric measurements of background loss in crystals 

      Savitski, V. G.; Kemp, A. (БНТУ, 2012)
      We report on the measurements of absorption coefficient of the synthetic diamond crystal using an adapted form of laser calorimetry technique at wavelengths of 1064, 640, 532, 452 and 364 nm. The absorption coefficient was found to increase exponentially from 0,03 cm-1 at 1064 nm to 0,7 cm-1 at 364 nm.
      2013-02-14

    • Simulation of cathode surface sputtering by ions and fast atoms in Townsend discharge in argon-mercury mixture with temperature-dependent composition 

      Bondarenko, G. G.; Kristya, V. I.; Savichkin, D. O.; Żukowski, P. V. (БНТУ, 2018)
      The mixture of argon and mercury vapor is used as the background gas in different types of gas discharge illuminating lamps. The aim of this work was development of a model, describing transport of electrons, ions and fast atoms in the one-dimensional low-current gas discharge in argon-mercury mixture, and determination of the dependence of their contributions to the cathode ...
      2018-09-18

    • Smartphone-Based Automated Non-Destructive Testing Devices 

      Petryk, V. E.; Protasov, A. G.; Galagan, R. M.; Muraviov, A. V.; Lysenko, I. I. (БНТУ, 2020)
      Currently, non-destructive testing is an interdisciplinary field of science and technology that serves to ensure the safe functioning of complex technical systems in the face of multifactorial risks. In this regard, there is a need to consider new information technologies based on intellectual perception, recognition technology, and general network integration. The purpose of ...
      2020-12-18

    • Spectral Ellipsometry as a Method of Investigation of Influence of Rapid Thermal Processing of Silicon Wafers on their Optical Characteristics 

      Solodukha, V. A.; Pilipenko, U. A.; Omelchenko, A. A.; Shestovski, D. V. (БНТУ, 2022)
      One of the possible ways of improvement of the surface properties of silicon is the solid phase recrystallization of the surface silicon layer after the chemical-mechanical polishing with application of the rapid thermal treatment with the pulses of second duration. The purpose of the given paper is investigation of influence of the rapid thermal treatment of the initial silicon ...
      2022-11-11

    • Stand Equipment and Test Methods of Modern Optical Sights 

      Kurganovich, A. M.; Stasilovich, V. A.; Shishkin, I. P.; Shkadarevich, A. P. (БНТУ, 2022)
      Manufacture of sights with high output characteristics is a prerequisite for achieving the necessary accuracy when shooting. The aim of the work was to analyze the influence of pancratic optical sights’ main parameters on their output performance characteristics. It is shown that in order to achieve the quality level of the world’s best samples, high image quality – no drop in ...
      2022-11-11

    • Static and dynamic stability of gravi-inertial sensors with capacitive differential system of sensitivity adjustment 

      Джилавдари, И. З.; Мекид, С.; Ризноокая, Н. Н.; Абдул Сатер, А. (БНТУ, 2016)
      Изучается конструкция гравиинерциального датчика с упруго подвешенной массой, обладающего максимальной чувствительностью и минимальным уровнем шума. Датчик содержит упругий торсион, электростатическую емкостную систему измерения движения подвижной массы и электростатическую емкостную систему уменьшения крутильной жесткости торсиона. Обе емкостные системы объединены в единую ...
      2016-06-07

    • Surface Eddy Current Probes: Excitation Systems of the Optimal Electromagnetic Field (Review) 

      Halchenko, V. Ya.; Trembovetskaya, R. V.; Tychkov, V. V. (БНТУ, 2020)
      Development of technical tools with improved metrological and operational characteristics is the actual problem of the eddy current testing. Ensuring the optimal distribution of the electromagnetic excitation field in the testing zone carries out confident detection of the defects and determination of their geometrical parameters by means of eddy current testing. The purpose of ...
      2020-06-29

    • Synthetic Aperture Orbital Telescope for Earth Remote Sensing Equipment 

      Kozhevnikov, D. A.; Fiodоrtsev, R. V.; Silie, A. R. (БНТУ, 2018)
      The object of the research is the development of the method of aperture synthesis of a mirror system designed for remote sensing of the Earth. The analysis of existing methods for the formation of the synthesized aperture was carried out, their accuracy, cost, and mass-dimensional characteristics were evaluated. A new version of the optical system of the synthetic aperture mirror ...
      2019-01-02

    • System Eliminating Emergency Discharges in Industrial Facilities Waste Waters Using Relative Signal Description 

      Alekseev, V. A.; Yuran, S. I.; Usoltsev, V. P.; Shulmin, D. N. (БНТУ, 2022)
      Peak emergency discharges of harmful substances to the industrial companies waste waters that normally form coagulates over time present a serious environmental problem. These coagulates can enter natural water bodies during the wastewater discharge. Thus, detecting these coagulates in real-time is a relevant problem. To solve this problem, the authors suggest building an automated ...
      2022-07-06

    • System for Assessing the Effectiveness of Temporary Blinding Devices 

      Terekhova, M.; Rudikov, S.; Shumski, A.; Shkadarevich, A. (БНТУ, 2020)
      The development of non-lethal weapons and, in particular, temporary blinding devices is associated with problem of choosing boundaries of effectiveness. The aim of present work is determination of criteria for estimation of the effects of visual jamming devices action on the naked eye. The present-day scoring system used for effectiveness estimation of laser temporary blinding ...
      2020-06-29

    • System of Laser Monitoring of Water Pollution with Application of Relative Description of Signal Shape 

      Alekseev, V. A.; Yuran, S. I.; Usoltsev, V. P.; Shulmin, D. N. (БНТУ, 2020)
      As a rule, the wastewater treatment system is not designed to filter substances formed, as a result of beyond design basis accident. The nature of the beyond design basis accident is associated with the shortterm appearance of a clot of these substances in wastewater, determined by the volume of the substance storage tank. Therefore, a rational approach is to divert this portion ...
      2020-06-30

    • Tensor Calculus in Digital Colorimetry 

      Saukova, Y.; Hundzina, M. (БНТУ, 2022)
      Any object can have many implementations in the form of digital images and any digital image can be processed many times increasing or decreasing accuracy and reliability. Digital colorimetry faces the need to work out issues of ensuring accuracy, metrological traceability and reliability. The purpose of this work was to generalize approaches to the description of multidimensional ...
      2022-11-11

    • Tests of Impregnation Speed of Electrotechnical Pressboard with Insulating Oil 

      Kozak, C. (БНТУ, 2020)
      The paper presents a new test stand for ivestigating the rate of penetration of transformer oil through electrotechnical pressboard. The stand consists of a pipe, to the lower end of which is glued a pressboard plate. The pipe is filled with insulating oil. A mirror is placed under the plate, which directs its image to the lens of the camera, which takes a series of photographs ...
      2020-06-30

    • The Dynamic Behaviour of Capacitive Humidity Sensors 

      Majewski, J. (БНТУ, 2020)
      The sensor design features and the sensing material properties which can influence the response time of the polymer-based capacitive humidity sensors are shortly discussed. The ways of specifying the dynamic properties of capacitive humidity sensors in technical data sheets by the leading companies on the market are briefly characterized and discussed. The schematic view and ...
      2020-03-17

    • The Use of Fresnel Lenses in LED Sources of Local Illumination to Оptimize the Distribution of Illumination of the Working Plane 

      Bogdan, P. S.; Zaytseva, E. G.; Kovalenok, I. A.; Tarasenko, T. D.; Duboysky, E. V. (БНТУ, 2023)
      For widely used LED sources there is a sharp decrease in the illumination of the working plane from the center to the edge. The purpose of this study was to analyze the effectiveness of Fresnel lenses usage as a fairly simple and technological element to increase the uniformity of illumination created by LED lamps of local lighting. A method has been developed for calculating of ...
      2023-08-15

    • Thermal lensing measurements in the anisotropic laser crystals under diode pumping 

      Loiko, P. A.; Savitski, V. G.; Yumashev, K. V.; Kuleshov, N. V.; Pavlyuk, A. A. (БНТУ, 2012)
      An experimental setup was developed for thermal lensing measurements in the anisotropic di-ode-pumped laser crystals. The studied crystal is placed into the stable two-mirror laser cavity operating at the fundamental transversal mode. The output beam radius is measured with re-spect to the pump intensity for different meridional planes (all these planes contain the light propagation ...Nm.
      2013-02-05

    • Use of the Laser Beam Deflection Technique for Thermo-Optic Coefficients Study in Gadolinium-Yttrium Oxyorthosilicate Doped with Erbium Ions 

      Yumashev, K. V.; Goman, V. I.; Pavlovski, L. K.; Hertsova, A. V.; Malyarevich, A. M. (БНТУ, 2023)
      Results of use of the laser beam deflection technique for determination of thermo-optic coefficients (TOCs) of the Er3+-doped gadolinium-yttrium oxyorthosilicate crystal (Er3+:(GdY)2SiO5 – Er:GYSO) are presented. A 0.1 at.% Er-doped gadolinium-yttrium oxyorthosilicate crystal was grown by the Czochralski method under nitrogen atmosphere. Raw materials such as Er2O3, Gd2O3, Y2O3, ...
      2023-12-12