Browsing Материалы сборника по статьям by Title
Now showing items 11-30 of 47
-
Иделизированная модель CALS-технологии для машиностроительного предприятия
(БНТУ, 2008)Чигарева, О. А. Иделизированная модель CALS-технологии для машиностроительного предприятия / О. А. Чигарева, В. А Чигарев // Теоретическая и прикладная механика : межведомственный сборник научно-методических статей / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2008. – Вып. 23. – С. 232-241.2019-11-15 -
К вопросу об определении износа во вращательных кинематических парах рычажных механизмов
(БНТУ, 2008)It is necessary to construct hodographs of reactions for estimation of distribution of wearing in elements of turning kinematic pairs. However if both parts of pairs are mobile, the real picture of expected wearing can be received, having presented reaction in mobile systems of the coordinates connected with corresponding parts. The features of definition of reactions in mobile ...2019-11-15 -
К исследованию граничных значений напряжений при решении плоских нестационарных задач термоупругости однородных изотропных тел методом граничных элементов
(БНТУ, 2008)Хвисевич, В. М. К исследованию граничных значений напряжений при решении плоских нестационарных задач термоупругости однородных изотропных тел методом граничных элементов / В. М. Хвисевич, А. И. Веремейчик // Теоретическая и прикладная механика : межведомственный сборник научно-методических статей / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. ...2019-11-15 -
Кинематика зубчатых передач с некруглыми колесами
(БНТУ, 2008)В работе рассмотрена кинематика двух типов зубчатых передач с эллиптическими колесами. Получены формулы для угловой скорости и углового ускорения ведомого колеса, на основании которых построены графики зависимости указанных угловых характеристик от угла поворота ведущего колеса, вращающегося с постоянной угловой скоростью.2019-11-15 -
Кинематический и динамический анализ колесно-шагающей машины на основе компьютерных моделей в пакетах ADAMS и VisualNastran
(БНТУ, 2008)Paper deal with computer simulation of the wheel-stepping machine (WSM) using VisualNastran and ADAMS programs facilities. WSM motion process, trajectories, turnability parametres were calculated for different transference modes and situations.2019-11-15 -
Комплексное моделирование электромеханических систем на примере офсетной печатной машины
(БНТУ, 2008)This paper is devoted to the building of complex modeling environment on the basis of SolidWorks, Visual- Nastran and Matlab/Simulink packages. Possibility of creation of such an environment is demonstrated on the example of model offset printing machine with the printing cylinder angular velocity stabilization system. Connection and exchange information between the mechanical ...2019-11-15 -
Компоновочные схемы для моделирования трансмиссионных зубчатых механизмов
(БНТУ, 2008)While modeling transmission, two main types of models are used: a kinematic scheme and a CAD assembly. Both types have their own advantages and disadvantages as well. The kinematic scheme is flat and it doesn't contain special data to calculate loads. The CAD assembly - quite the contrary — is too detailed and it is rather hard to create this kind of model. This paper presents ...2019-11-15 -
Компьютерное моделирование прямой и обратной задачи кинематики пространственной системы перемещений с шестью степенями свободы в среде MATLAB/Simulink
(БНТУ, 2008)The six degree offreedom spatial movement system has been examined. Algorithms and simulation programs for direct and inverse kinematic problems solving of spatial mechanism are presented. As a result of computer simulation the movement system's actuator spatial motion capabilities are obtained and investigated.2019-11-15 -
Компьютерный анализ напряженно-деформированного состояния ортодонтического аппарата
(БНТУ, 2008)In the present paper results of modeling and calculation strain - deformed conditions of the orthodontic device with four crowns, executed in a finite - element package Ansys and Ansys Workbench are submitted.2019-11-15 -
Концепция разработки информационных учебных пособий при изучении теоретической механики в УО «ВГТУ»
(БНТУ, 2008)Conception of creating information manuals at study of the theoretical mechanics. Are given an estimation and recommendations for use machine and without machine programmed of the control of knowledge of the students, the conditions are stated which should answer process of mastering and quality of preparation at independent work of the students.2019-11-15 -
Математическое моделирование одного класса задач теории оболочек
(БНТУ, 2008)The general methods of the resolution of the partial differential equations of the first order for a prescribed of the strain state of thin-walled elastic shells of the given type (momentless or pure moment) are obtained.2019-11-15 -
Методическое обобщение стержневой модели шероховатости в курсе «Контактные задачи и трибология»
(БНТУ, 2008)А methodical generalization of а rod model of roughness was made in the paper.2019-11-15 -
Методы дискретизации и гомогенизации в динамических задачах сложных механических систем
(БНТУ, 2008)Чигарев, А. В. Методы дискретизации и гомогенизации в динамических задачах сложных механических систем / А. В. Чигарев, Д. Н. Миронов, Э. Каминский // Теоретическая и прикладная механика : межведомственный сборник научно-методических статей / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2008. – Вып. 23. – С. 167-173.2019-11-15 -
Моделирование динамического поведения жесткопластической криволинейной пластины с произвольным свободным отверстием
(БНТУ, 2008)А rigid, perfectly-plastic model of solids is applied to study the dynamic behavior of simply supported or clamped, arbitrarily shaped plates with an internal, free, arbitrarily shaped hole. Governing equations for dynamic behavior are obtained. Operating conditions of possible mechanisms of deformation are analyzed. Analytical expressions for the ultimate loads are obtained.2019-11-15 -
Моделирование маневра «переставка» в ADAMS
(БНТУ, 2008)Description of а model of а vehicle MAZ-4570 assigned for dynamic analysis is observed in the present article. Results of dynamic simulation of resetting maneuver and results offinite-element modelling offront and rear car suspension are also given here.2019-11-15 -
Моделирование разрушения сварного соединения в пакете LS-Dyna
(БНТУ, 2008)А crush model of а weldjoint was created in the paper.2019-11-15 -
Напряженно-деформированное состояния силовой системы ролик-кольцо в условиях контактного взаимодействия и объемного деформирования
(БНТУ, 2008)А three-dimensional field of stresses in the roller-ring active system is observed in the present paper. The field was obtained by superposing the field of stresses conditioned by action of normal and tangential elliptically distributed contact forces and by bending of the ring. A significant change of the state of stress in comparison with the solution for the pure contact problem ...2019-11-15 -
Об объектах, изучаемых в механике
(БНТУ, 2008)Витязь, П. А. Об объектах, изучаемых в механике / П. А. Витязь, М. С. Высоцкий, Л. А. Сосновский // Теоретическая и прикладная механика : межведомственный сборник научно-методических статей / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2008. – Вып. 23. – С. 3-12.2019-11-15 -
Обучение Internet-технологиям в курсе «Информатика»
(БНТУ, 2008)The given article is devoted to features of training the Internet-technologies in discipline "Informatics". Authors have created the electronic simulator applied in laboratory works. The fragment of the electronic instruction is shown.2019-11-15 -
Определение коэффициентов интенсивности напряжений путем моделирования трещины в ANSYS
(БНТУ, 2008)3-D finite-element model of rigid body with crack was created in ANSYS program. Stress intensity factors were calculated for three loading situations. Comparison of the solutions of the classical crushing mechanics problems with computer simulation results instill confidence in the validated modeling. ANSYS mode was used for exploration of the stressedly-deformed mode in the ...2019-11-15